Drawings, photos and videos of do-it-yourself swing gates. Do-it-yourself gates: drawings, photos and videos of different types Do-it-yourself gates to a private house

Owners of private houses and garages have long appreciated the convenience of swing-type entrance gates.

This is natural, because such a design was almost the only one for hundreds of years.

Ease of operation and reliability have always been at a premium. Even now, summer residents and cottage owners continue to improve their design.

And if previously these were basically wooden blind gates, then their modern type can be represented by a high-tech automated complex.

Types and types of swing gates

As noted above, swing entrance gates, depending on the material, can be of two types: wooden and metal. By design, it is customary to distinguish gates with two floors (double-leaf) and with one hollow (leaf).

Very often, especially in the construction of gates for garages, hangars and warehouses, a combined type is used - double-floor gates with a wicket. This saves space and materials for a separate entrance. But in most cases they are made as “blind” elements, and only in some places (government institutions, hospitals, etc.) can you find forged, lattice or tubular swing gates with an entrance to them.

Another type of gate is a metal swing gate with two wings using artistic decoration and (or) lined with painted profiled sheeting. The gate floors have a lightweight appearance, and the entrance (wicket) is made next to them.

This type is perfect for a private home. It is widely used because it lasts for decades and requires virtually no repairs, unlike its wooden counterparts. Additionally, the design can be equipped with automation, which will further increase their functionality.

Swing gate device

Let's look at a drawing of a typical gate design made from corrugated sheets. It is based on a frame made from the profile of a square or ordinary pipe with a diameter of 20 to 40 mm. Each leaf can have one or two horizontal veins to enhance the rigidity of the structure (Scheme 1).

Other options are also possible, for example one horizontal and two diagonals. This arrangement clearly maintains the geometry of the gate (diagram 2).

Any owner can make swing gates with his own hands, provided he has sufficient skills in assembling metal structures. You will need to be able to use a welding machine, drill, grinder, screwdriver and measuring instruments. May also need painting.

Each gate leaf is screwed onto self-tapping screws or welded onto hinges to the posts. Two hinges with a diameter of 20 or 30 mm are enough per sash. The pillars are also made in the form of a metal pipe with a diameter of 70 -76 mm, or a profiled pipe 20 x 40 mm.

Iron pipes (hanging post) can be used directly as a gate support, but depending on the design of the fence, they are mounted in brick (concrete) columns. To do this, you need to provide two embedded parts in the brickwork, onto which the hinged gate posts are welded. For diagonals (slanted) and transverse, it is recommended to use a profile of 20 x 20 or 20 x 40 mm.

Practice has established that the optimal width for private entrance gates can be considered 3 meters. This is quite enough for any car or truck. If you want to save money, then you should not reduce the size by more than 20 cm. The height of the gate in most cases, excluding the rise above the ground, is equal to two meters.

The gate locking mechanism, as a rule, consists of an “L” shaped pin (stopper) located at the bottom of each gate. At the base of the ground in the place where the gate is fixed, holes are provided from pipes, the internal diameter of which is 5-10 mm greater than the thickness of the stopper. There are no strict restrictions on the length, but it is still advisable to make them no more than 50 cm. In addition to the stoppers, you can provide a horizontal shutter, transverse along the line.

As already mentioned, the simplest and most practical option for finishing gates is lining them with corrugated sheets. The corrugated sheeting will fit organically into the overall design if the fence is kept in the same style. Typically, corrugated sheets are attached to gates at a distance of 5-7 cm from the level (base).

Gate automation

So far we have looked at the design of a conventional swing gate. But what if you suddenly get tired of manually constantly opening and closing the doors, or for some reason you want to modernize them. For this case, design engineers developed so-called linear electric drives (automation).

This system consists directly of the linear electric drives themselves (2 pieces), as well as a control unit, warning lamp, antenna and electromagnetic lock. Automatic swing gates are powered by a regular household AC voltage of 220 W. In the photo, all elements of the system fit elegantly into the original antique design of the gate.

It is very important to provide supporting pillars in advance before installing the automation. As in the previous examples, it is advisable to make them from concrete, or even better from brick.

There are three options for installing automatic gates depending on the opening direction of the gate: outward, inward, and inward with modification of the supporting pillars. In each of them, installation of automation is carried out in a certain sequence. In our case, external installation may be required, or the latter option (for the future), since we initially considered the option for future automation.

The location of the system control unit may be different (left or right), it is important to select the correct wire cross-sections. The figure below shows an approximate diagram of the arrangement of system elements and wire cross-section.

The drive for installation has a special feature; for it, a special distance from the supporting pole must be provided. If this is not provided and the gate needs to be made inward, as in our case, then you just need to carefully hollow out and arrange the places for it.

The price of linear drives ranges from 23 to 36,000 rubles. For example, an electric drive from DoorHan Swing-5000 (up to 5 meters) costs around 25 thousand.

Assembly and installation technology for swing gates

Gates should be made in stationary conditions on the ground and a leveled surface (carriage). The dimensions of your gate must exactly match the design drawings. That is, all workpieces must be sawed off with a grinder with a tolerance of 1 mm. Then, checking the right angles, they weld the parts of the future perimeter of the gate leaves, and then the crossbars and diagonals.

The markings for the hinges are made at a distance of at least 30 - 40 cm from the edge of the frame and then welded to it. Hinges can be bought in a store or ordered from a lathe. Then they bring up the hanging pole and do the same actions with welding, using the tack method.

If everything is exactly the right size, the loop is completely scalded. You don’t have to use welding, but then you’ll have to screw each canopy through thick steel onto self-tapping screws. After painting the metal, you can screw the corrugated sheet with screws and a press washer.

The installation of swing gates begins with marking the support (concrete or brick) pillars along the centers of the main axis of the gate. At the base of the pillars, an iron pipe with a diameter of 100 mm must be mounted on the concrete. It must be dug to a depth of 130 -150 cm. This is best done using an auger (drill) of the appropriate diameter, leaving a space for pouring concrete of approximately 10 cm around the circumference.

When setting up the base of a brick pillar, use a level and check the vertical in both planes. A gap of 20 mm is required between the gates, which can be covered from the outside with a metal strip 50 mm wide. So tolerance is necessary, because on hot days, when heated, the metal expands, and your gate may simply jam. Homemade swing gates will look no worse than their factory counterparts if you approach the process of assembling them wisely.

There are many options for gate design, but it is simply impossible to describe them all. Each case is individual and therefore the manufacture of swing gates can be called a creative process, where each owner can implement his own ideas or take existing ones.

In most cases, the construction of infrastructure facilities on a summer cottage does not require the qualified intervention of builders. Since erecting a fence and organizing an entrance are the primary tasks when arranging any home, it is most advisable to understand the issues of what types of entrance structures exist and which materials are most rational to use when installing them, as well as how to make a gate in a dacha.

To successfully make any type of gate structure with your own hands, you need three main components - facing material, tools and time. Each garden plot and internal area is characterized by the use of a certain type of gate, since each of them has its own opening and installation technology, drawings, recommended finishing, as well as consumables. To determine the optimal one, it is necessary to identify the properties, advantages and disadvantages of the most used types of gates.

The principle of operation of swing gates is determined by their structure, which includes two leaves that swing open in directions opposite to each other. The construction of such gates will help to save a lot of time when organizing entry and exit.

The main advantages are:

ease of installation;
reliability;
durability.

Flaws:

the presence of a cleared space for opening the gate leaves, which must be maintained in proper condition during the winter period;
in the case of using the gate in automatic mode, you will need to purchase two sets of motors for each of the leaves, which will significantly affect the total cost.

Having an undeniable advantage over the previous type, sliding gates are a structure consisting of one leaf, moving parallel to the equipped support pillars, along the fence line, in a certain direction.

This category of gates, in turn, is divided into three subgroups, which are suspended, cantilever and rail, therefore, when purchasing one or another set of such gates, it is necessary to understand the specifics of construction and the features of further operation. Thus, the suspended type involves the manufacture of a special hinged safety beam, which is the basis for fastening and subsequent movement of the sashes.

The cantilever type involves the installation of cantilever mechanisms and a channel beam, as well as the presence of several additional meters for optimal rollback of the gate, and the rail version is characterized by the placement of a guide rail at the bottom of the structure.

The advantages of such gates are:

compactness and no need to prepare a cleared space for opening the doors;
possibility of using automation;
practicality;
moderate pricing policy;
organization of a wide passage, as well as the convenience of remote control of the gate).

Flaws:

constant monitoring of the cleanliness and availability of lubrication of roller mechanisms;
carrying out a number of preparatory procedures (calculating the distance for rolling back the doors and having a perfectly level fence);
basic construction skills and knowledge of installation features.

Any owner of a country home can cope with the construction of such a structure by following the step-by-step instructions of the craftsmen, however, due to the high cost of component materials and devices, as well as the high chance of making mistakes in the calculations or assembly of the structure, it is more advisable to seek help from specialists. In this case, you can count on a free specialist visit and warranty service for the agreed period.

Being a type of sliding structures, sliding gates consist of two doors that slide apart in two opposite directions. Based on the technology of movement, sliding gates are also divided into component groups, just like the type of gate described above. The defining advantage of such an opening mechanism is the reduction in the overall weight of the gate by distributing the load across two frames, but this advantage is achieved by using two sets of motors, which significantly increases the final cost.

Among the huge variety of materials presented in the assortments of construction stores, the materials that have become most widespread when arranging entrance gates include metal and wood. In this matter, the choice of one or another raw material mainly depends on the financial capabilities of the owner.

Of course, preference in this category of materials is given to corrugated sheets, since it has a number of important distinctive advantages, however, like every raw material, it has some disadvantages.

The advantages of this material are:

strength due to the rigidity of the base;
moderate cost;
ease of installation;
resistance to harmful environmental influences;
wide choice of colors;
duration of operation.

Flaws:

if the protective shell of the sheet is slightly damaged, corrosion may occur;
noise when exposed to precipitation.

In the presented category of materials, we can also highlight such a representative as chain-link mesh. Gates of this type have a high light transmission capacity, have low windage and are light in weight. In addition, the mesh is fastened in a short time and without exhausting effort.

Nowadays, wood-based gates are a rare occurrence. This circumstance is due to the endless desire for safety and durability, which are easily achieved by using metal products. Making the frame for the doors and cladding from wood over time leads to sagging of the gate and deformation of the entire structure due to its bulkiness and high specific weight. Of course, the use of wood as a basis for gates, the construction of country houses and site decorations highlights the natural component of the appearance and allows you to feel unity with nature, however, it requires special processing of each element and subsequent regular seasonal repairs.

Among the advantages of such raw materials are:

low cost;
availability of material;
a minimum number of tools and consumables, which significantly saves the budget;
pleasant aesthetics;
quick installation;
ease of processing.

However, the pleasant positive characteristics are largely offset by the negative properties of such a material. The main ones:

short period of operation;
low strength;
exposure to negative environmental factors;
fear of sudden changes in temperature and increased moisture content;
tendency to ignite.

If, nevertheless, you are determined to use wood for cladding the “calling card” of your personal plot, then it is most advisable to carry out this process on a metal frame made of a profile pipe or any other metal support floors.

The main purpose of the support base is to securely fix all the components of the gate. As a rule, the foundation is represented by a reinforced rectangular concrete block placed along the perimeter of the proposed installation of the structure being built. In our case, concrete pouring is carried out away from the driveway, in the internal area of the house. When manufacturing swing gates, the foundation should be located in the direction of opening of the leaves to reduce the load on the hinges when open.

The issue of high-quality pouring of a concrete base when making metal gates is especially acute, since it ensures uniform distribution of the pressure of metal products on the soil, protecting the entire structure from shrinkage and distortions.

When starting to carry out work on arranging this element, you should clearly understand that the quality of the foundation will be the same as the functioning of the gate. When constructing massive objects, it is most rational to prepare deep foundations, for small structures - lightweight supports.

A useful activity preceding the procedure for pouring a reliable foundation is taking samples and conducting a soil analysis along the perimeter of the future installation sites. Knowing all the characteristics of the soil will subsequently ensure the stability of the gate and determine the optimal type of foundation.

Based on the above recommendations, each owner of a suburban area will be able to easily select the most suitable gate manufacturing option for him and implement it in the shortest possible time. Any work performed by oneself allows not only to significantly reduce the costs of constructing a particular object, but also to clearly understand the structure of each connecting component, which will subsequently significantly simplify possible maintenance and repair processes.

Video

You can learn about the manufacture of different types of gates by watching the videos we offer:

Schemes and drawings

The operating mechanism of swing gates is quite simple, but automated sliding gates are more complex to manufacture. We hope the drawings and diagrams we offer will help you understand this issue:

Reliable, easy to use and easy to manufacture, metal gates are perfect for installation in suburban areas, summer cottages and any other objects. The assembly and installation of the structure in question can be done with your own hands. It’s quite simple and much more profitable than entrusting the same work to professionals. Most often, swing metal gates are installed on individual plots. This is the easiest system to assemble, the device of which can be handled with your own hands without any problems.

Before starting work on installing metal gates, it is necessary to prepare a detailed, competent design of the structure being built. The most important thing is to determine the optimal dimensions.

So, if trucks will pass through the gate, the width of the structure should be 350-400 cm. For passenger cars, a width of 250 cm will be sufficient.

As for the height, for gates in private areas, 200-250 cm is usually sufficient. Everything, again, depends on the size of the car.

Additionally, provide in the design some gap between the ground surface and the gate frame. This gap will allow you to open the gate in snowy weather.

Gate design features

The design of metal gates is based on a frame. To assemble the frame, an ordinary pipe with a diameter of 2-4 cm is usually used. The frame can also be made from a profile with a square cross-section.

Each gate leaf must be equipped with 1-2 horizontal veins, thanks to which a higher rigidity of the system will be ensured. Instead of a horizontal arrangement of veins, you can choose other options, for example, placing one transverse horizontal vein and two diagonal ones.

To assemble the gate yourself, you need to have skills in handling an angle grinder, basic measuring instruments, a welding machine, a screwdriver, and a drill. If you do not have the proper skills, you will have to spend some time learning.

You can use self-tapping screws to secure the sashes, but it is best to use standard fastening using hinges. For one sash, a pair of hinges with a diameter of 2 or 3 cm is enough.

Support posts are made of profiled pipe 2x4 cm or round pipe with a diameter of 7-7.6 cm.

The supports can be erected directly from pipes dug into the ground and secured with concrete mortar. There is also an option according to which the pipes are installed in brick pillars. There must be a couple of embedded parts in the brickwork. Hinged posts of homemade gates will be welded to them.

The locking mechanism of metal gates is usually shaped like the letter “L” and is made of an iron pin. Elements of the mechanism are installed at the bottom of each gate leaf.

In the place where the shutters are fixed, special mounting holes are created in the ground. It is convenient to use metal pipes for their installation. Select pipes such that their internal diameter is approximately 1 cm greater than the thickness of the locking mechanism. It is advisable that the length of these pipes does not exceed 500 mm.

For covering a metal frame, it is most convenient to use profiled sheets. Modern corrugated board fits perfectly into the design of any site. Choose a material that matches well with the fence. The corrugated sheet is usually fixed at a height of about 50-70 mm from the base.

What you need for work: list of tools and materials

Prepare in advance everything you will need in the process of performing the work in question.

Kit for self-assembly of metal gates

1. Pipes of the previously mentioned sizes.

2. Brick.

3. Cement grade not lower than M400.

5. Metal profile.

7. Hammer.

8. Rivets.

9. Self-tapping screws.

10. Pencil.

11. Measuring tools (protractor, tape measure).

12. Emery.

13. Bulgarian.

14. Brush and paint (if you plan to paint the gate after installation).

Step-by-step instructions for assembling and installing the gate

The first stage is the manufacture of supports

Prepare materials for assembling gate supports and assemble them into a single structure. You can use pipes and metal profiles as a base. You will also need a channel. It is important that the width of the channel shelf is at least 10 cm. The stronger the support, the longer the entire structure will last.

Stage two – installation of supports

Gate support pillars will be subject to increased load, especially when closing and opening the structure. Therefore, at the stage of installing supports, you will be required to take much more responsibility than when installing an adjacent fence.

The supports are dug into the ground and filled with concrete mortar or covered with a brick base. There is also the option of installing supports directly on brick foundations, but for a beginner it is very difficult to perform such installation correctly.

Make canopies from garage hinges. Select the number of hinges in accordance with the size and weight of the sashes. In most cases, two hinges per sash are sufficient. If the sashes are very massive, increase the total number of hinges to six.

Weld steel plates about 5 mm thick to both sides of each hinge. The plates should be welded over the entire contact area.

The third stage is the installation of support pillars

Make these racks from square metal profiles. Cut a couple of pieces the same length. The immediate length of these parts should be approximately 20-30 cm less than the height of the gate leaves.

Weld the hinge plates to the finished posts. You should end up with two structures that are identical in size and spatial orientation.

Secure the finished structures to the installed supports. Carry out the fastening in such a way that there is a gap of no more than 3-4 mm wide between the supporting pillar and the supporting structure.

Cut the upper part of the metal profile to a suitable length and secure the cut to the top points of the support posts.

Completely fasten all structural elements using a welding machine. Perform spot welding.

The fourth stage is the final one

Install two central posts in the center of the metal gate. Carry out the installation so that there is a gap of about 1 cm between the mentioned elements. The central pillars must be “grooved” by welding. The steel plates are thoroughly welded to the support posts.

To strengthen a homemade gate, take a sheet of steel about 50 mm thick and cut it into 8 parts. Secure the resulting parts to the corners of the gate leaves. Finally, you need to divide the structure into 2 parts using an ordinary grinder to get two identical sashes.

If possible, make gaps of a couple of millimeters in the hinges. These gaps will prevent the gate leaves from moving in the future.

Finally, you can finish the finished gate with your preferred material, for example, paint it.

There are many tools and devices available on the modern market that allow you to automate homemade metal gates. If you are already tired of moving the shutters manually, buy an ordinary linear electric drive, and the problem will be solved!

The automation tool under consideration consists of two linear electric drives and a control unit. The design also includes an electromagnetic lock, a special antenna and a signal lamp.

An ordinary household power supply of 200 W is suitable for powering the automation equipment.

Gate automation can be performed according to three different methods. The specific method is selected taking into account the direction in which the gate leaves open. They can open inward, outward, or inward with modifications to the support pillars. For beginners, it is best to give preference to the option with the doors opening outward.

The control unit can be installed on the right or left. Specific installation recommendations are provided in the accompanying instructions. The instructions also indicate the requirements for wire cross-section. Check all these points before starting automation work.

The installation process itself varies for different models of automation systems. Consider a specific scheme on an individual basis. You will find it in the instructions for your device.

It is important to know one common installation feature for all systems - the drive must be placed at a certain distance from the support pole. You can also find information about the optimal distance in the instructions for your device.

After installing the control unit, using the gate will become much more convenient. You can control the position of the shutters from a special stationary remote control or a portable device in the form of a miniature key fob. There are also designs that automatically open when a car approaches them, but this option is more suitable for sliding gates.

Thus, there is absolutely nothing complicated in building metal gates yourself. You only need to determine the optimal dimensions of the structure, assemble the base, secure all the necessary elements, and finally, if such a desire arises, perform simple work to automate the system. Follow the instructions and everything will definitely work out.

Good luck!

Video - DIY metal gates

Gates made of corrugated sheets differ in the type of opening of the leaves and are divided into swing, sliding and lifting. We will consider the simplest option, which does not require much experience to produce. Do-it-yourself gates from corrugated sheets can be made with little material and labor costs, however, they will look stylish and beautiful if you choose the right color and design.

Installing corrugated gates with your own hands

Swing gates- the simplest and most common gate design used on private land. Gates made from corrugated sheets are easy to weld and install with your own hands, even with a minimum of tools and skills; you just need to strictly follow the instructions.

Standard swing gates consist of two supports and two leaves, which are connected to each other and closed with a lock, latch or other latch.

Gates made of corrugated sheets. Blueprints

To start making gates, you need to draw up blueprints gates made of corrugated sheets, calculate the amount of necessary materials, fasteners and choose the right tools. We will look at how gates are installed on a standard 4-meter driveway opening.

To weld the support posts for the gate you will need thick wall pipe 60x60x3x3000 mm. You can choose any pipe cross-section; it does not affect the quality of the supports and is selected only based on their availability.

For the gate frame you will need rectangular pipe 40x25x2x6000 mm. From it we make rectangular frames, to which corrugated sheeting will be attached in the future. After the frames are ready, they are attached to the gate hinges to the installed posts. A locking device is provided at the point where the valves close.

After installing the structure, you can begin painting the frame gate To do this, we clean the surfaces using a grinder, cover them with 2 layers of primer and paint of the same color as the selected corrugated sheet for cladding. The part of the pillars that will be underground must be coated with waterproofing paint to protect it from corrosion when in contact with wet ground.

Pillars installed in prepared, drilled holes in the ground and concreted with M200 or M250 concrete. The depth of the foundation for gates made of corrugated sheets must be at least 1.5 meters and a diameter of 25 cm. To avoid skewing of the gate after some time, you can additionally connect the pillars with a monolithic concrete crossbar.

After the concrete has dried, the frame of the gate frame is sewn up on the front side corrugated sheeting with an overlap equal to the width of one wave. This must be kept in mind when calculating the amount of materials needed. Roofing screws or steel rivets are used as fasteners to avoid corrosion at the point of contact of different metals.

Lastly, it is installed locking device. If necessary, apply paint to areas of the gate damaged during installation.

Do-it-yourself gates made of corrugated sheets. Video

A real example of making gates from corrugated sheets

Swing gates made of corrugated sheets are one of the least expensive and reliable solutions, which can also be easily implemented in a short time with your own hands. Making gates is a simple process that only requires careful study of the instructions and the necessary tools. Usually, in order not to take up extra space on the site when opening the gate, The doors are made to swing open towards the street.

To make swing gates from corrugated sheets with your own hands you need:

Decide on sizes designs and draw diagram installation of gates made of corrugated sheets. Standard openings for vehicle passage are usually 4 or 6 meters. In any case, you cannot make a gate narrower than 4 meters, since you need at least room for maneuver, and secondly, in the future, you may have to let a car much wider through the gate than you have now.

Do-it-yourself gates made from corrugated sheets. Drawing

On drawing you need to apply all the dimensions so as not to get confused during the manufacturing process and choose the right amount of materials. The heavier and more voluminous the structure, the larger the diameter you will need to select pipes for the gate frame. Internal jumpers can be made from a profile of smaller diameter, since the load on it is significantly lower than on external elements.

Drill holes in the ground, with a diameter slightly larger than the diameter of the support pillars. In order for the pillars to be securely fixed in the ground, the hole must be filled in crushed stone by 10 cm. It will act as a foundation cushion for gates made of corrugated sheets, level the gate posts and concrete. In order for the cement to set properly, you need to leave the structure alone for 6-7 days.

After the concrete has hardened, they are welded to the pillars. frame pipes fence After finishing work on the gate frame, they will be covered with corrugated sheets.

Do-it-yourself gates made of corrugated sheets step by step. Photo

Next, according to the drawing, it is manufactured rectangular frame for gates. At this stage, it is important to clearly mark and carefully weld each corner so that the gate does not have distortions or irregularities in the welding areas. Before final welding, you need to check how well the gate leaves fit together, after which the seams are welded and cleaned.

You can further strengthen the frame and give it even greater rigidity using metal corners. They are welded along the inner perimeter of the frame. After this, internal jumpers are welded to the frame, dividing the frame into equal rectangles. The lintels also strengthen the gates; in addition, sheets of corrugated sheets are attached to them.

The frame for wickets. If it is located next to the gate, then the width of the leaf is usually 80 cm, and the height corresponds to the height of the gate itself. Another option is when the gate is made inside one of the gate leaves, like a garage door. This gate is much smaller in size.

Gate installation begins with installation crossbars between support pillars. The crossbar is leveled, the gate is placed on it and checked level. To begin with, you need to secure the gate with a rope, slightly lifting the middle of the gate where the doors meet. The middle of the gate should be raised by a distance of about 3-5 cm. To fix the gate in this position, you can use a small board of appropriate height or other suitable object. After completion of the work, the force of gravity will act on the sashes in this place and they themselves will lower by this amount.

After the level is checked, we tack by welding loops to the posts, paying attention to the fact that some of the hinges with a pin are attached to the gate, and without it to the gate posts. The hinges must be welded flush with the profile, without protruding beyond it or falling through. At this stage, you need to carefully check how the gate opens and closes. After checking, it will be possible to finally weld the hinges, and to secure the gate from removal, a piece of corner is welded over the top of the hinge.

how to make a gate from corrugated sheets with your own hands. Photo

When the welding work is completed, the seams are finally cleaned, the frame is coated paint for protection against corrosion and rust. The support pillars are also coated with paint. Particular attention should be paid to the part that will be underground in order to protect the metal from destruction under the influence of the external environment.

For fastening corrugated sheets It is best to use roofing screws. The screw caps can easily be matched to the color of the corrugated sheet.

Sheets of corrugated sheets are cut to the shape of the gate, taking into account the overlap in one wave. From the outer edges we make slits for hinges, make preliminary markings and fasten the sheets, ensuring the accuracy of the work.

We install locks and latches.

This completes the manufacture and installation of gates from corrugated sheets with your own hands. If any parts of the gate are damaged during installation, it is necessary to re-paint the gate again to avoid corrosion of the metal during operation. After you tried to make your own gates yourself, you could be convinced that most of the costs in the manufacture of gates are labor costs, and the several hours spent on making gates more than pay off both in monetary terms and in the opportunity to create and make your own hand individual design for your gate.

Gate projects made from corrugated sheets

Even at the project stage, you can come up with a special design for the doors or columns and make minor changes to the drawings of gates made of corrugated sheets. The main thing is that the manufacturing process is virtually uncomplicated, but the end result is a much more interesting design of the passageway.

Swing gates made of red corrugated sheets are made with elements artistic forging. The posts with decorative tips and the uneven top edge make the gate look stylish and natural. They will suit a home in almost any style, except high-tech.

Double-leaf swing gates made of brown corrugated sheets with a black frame decorated decorative elements in the center of the valves and sharp tips along the upper edge. The gate is installed in a standard opening, the gate is cut into one of the leaves.

Sliding gates made of green corrugated board are in harmony with brick pillars and are made of the same material as the fence. A simple and stylish solution in this case provides reliable protection of the house from burglary and prying eyes.

Double-leaf swing gates are made in the same style as the fence. The gate is decorated with an element decorative forging. Brown corrugated sheeting in combination with brick supports is a classic solution that makes the fence not only reliable, but also beautiful.

Recoil gates made of corrugated sheets are a simple and reliable solution for protecting your site. On the street side, the gates are covered with corrugated sheeting, the color of which can be easily matched to the color of the fence or supports. If desired, an automatic system is installed on the gate, which will make opening and closing the gate even more convenient.

Nowadays, hinged doors are popular for entering a garage or garden. They are very practical and do not require special care. They can be ordered from a specialized construction company and received ready-made, or you can design and install them yourself, having previously selected the material for manufacturing. This is a simple system, consisting of two doors and complemented by a built-in or adjacent gate.

Swing gates with a built-in wicket made of corrugated sheets and metal profiles

Ready-made gates are much more expensive than the same design of your own making. In addition, building it with your own hands is the implementation of ideas for arranging your own property, without which no home craftsman can create. He immediately faces questions: is a gate needed? if necessary, then what it should be.

The practicality of a built-in wicket door in one of the planes of the gate is undeniable. There is no need to rattle a lock or bolt at every pedestrian entrance/exit, or waste time opening or closing heavy metal doors.

An example of a built-in gate made of corrugated sheets. In addition, there is a clear saving of space, especially if it has to be cut out when arranging a garage or cottage. And the mandatory threshold in front of it prevents the accumulation of snow, which prevents it from opening.

The adjacent gate also has many advantages. Usually it is installed without a threshold, which creates inconvenience when going outside with a stroller or bicycle. There is no obstacle for kids, who can easily get injured when overcoming it. However, after a snowy night it can be opened after appropriate clearing of the area.

The type of gate is determined not by the frame, but by the material with which it is filled. In this regard, they are:

wooden;
from corrugated board;
metal;
from forged metal.

Wicket doors, regardless of whether they are built-in or adjacent, always use the same material from which the gate is made.

Drawing with dimensions of the gate and built-in wicket

Otherwise, the whole structure will look unattractive, even ridiculous. Therefore, when purchasing wooden boards or sheets of corrugated sheets, you need to take into account the dimensions of the future adjacent gate.

Wooden gate

For a long time, the fence or entrance to the estate was equipped with a picket fence - narrow wooden slats nailed to the crossbar. No additional frame was required to strengthen the entrance structure. It is very simple to build, and the home craftsman will not need professional carpenter skills. However, due to frequent use, such gates soon became warped and required repair or replacement.

To strengthen the wooden entrance structures, they came up with a metal frame for attaching the cladding material. Such gates last longer, but even with the most careful care, wood is exposed to insects, precipitation, and temperature changes.

Construction of wooden gates and built-in wicket

It wears out much faster than metal parts. It won’t take much time to do it yourself next to the gate if it was designed in the fence before it was erected. It will cost the owner very little, even if you use high quality boards. You can't do without it here

door awnings;
handles, latches;
self-tapping screws;
antiseptic solution for wood treatment;
wood primers, varnishes;
concrete mortar.

The general procedure for DIY installation is extremely simple. The boards, which have been pre-treated with an antiseptic, are laid out on a flat horizontal surface in the form of a future door.

Diagram with dimensions for making a built-in wooden gate

Two transverse bars and one diagonal are nailed to the top and bottom edges. Then pre-prepared support pillars with sidewalls are installed.

The distance between the supports is equal to the width of the gate plus 2–3 cm. The depth of their immersion is determined by the level of soil freezing. They must stand on frost-free ground. Then the sash is hung, coated with wood primer and varnish. The door handle and latch can be attached last. With careful use, this design will last 10 years.
If the gate is made of a sheet of tightly adjacent boards, and they are strengthened by a metal frame, then the gate door should be made in the same style.

Gate made of metal picket fence and corrugated sheet

Later, a metal picket fence appeared, which strengthened the swing fencing structures and gave them a completely new look. This material, compared to wood, extends the service life of the wicket door by three times. However, routine maintenance is required, primarily painting and repairs.

A metal picket fence treated with a polymer composition can have a wide variety of shades. It has great design possibilities for creating color harmony in an ensemble with roofing tiles and brick walls of a dacha or a private city house.

Equipped with a steel picket fence, very durable. Their cost is much lower than brick or stone. The metal frame is covered with a picket fence with some clearance, so, unlike solid ceilings, it creates less windage under strong wind pressure.

An example of a built-in gate made of corrugated sheets

This is very important for a dacha that cannot be protected by nearby tall buildings. And the installation sequence is the same as when installing wooden gates. Regular fastening materials and tools are used.

Corrugated sheeting also has many advantages. This is a modern building material made from corrugated steel sheet, produced by cold rolling. It is galvanized and coated with a special polymer layer to protect it from adverse weather conditions. For this, you should use a profiled sheet with double-sided coating. Despite the metal frame, they will be equally attractive both from the yard and from the street.

The corrugated sheet is lightweight, so the installation of structures in a fence made from swing doors can be done with your own hands, without the use of complex construction equipment.

Drawing with dimensions of the metal gate frame

During installation you cannot do without the following power tools:

welding machine;
Bulgarians;
screwdriver.

The installation of support pillars is carried out according to the same rules as when constructing a gate made of wood or a steel picket fence. If the swing gates are already installed, then you can install a mortise gate in one of them. Moreover, all this can be done with your own hands.

Forged metal gate

Gates and wickets made of metal decorate not only fences for summer houses, luxury estates, cottages, but also the surrounding landscape. And the metal forging elements create an atmosphere reminiscent of the heyday of the Renaissance. Not everyone can do it with their own hands. Here it is necessary to follow a rather complex technology of cold or hot forging using special equipment. The posts for the future gate must be strong enough, so they are usually made of brick.

Original design of gates and wickets made of forged metal

The most reliable option is to install columns from a profile pipe or other material to which the curtains will be attached, and cover them with brickwork. The metal is pre-treated by removing corrosion stains with a grinder wheel. Then they are washed with gasoline to remove traces of technical oils.

Holes are dug in the ground 1 m deep, metal posts are inserted there and reinforced with compacted rubble. At the same time, using a plumb line, constantly check their strictly perpendicular position. Concrete solution is poured on top. The finished supports are covered with bricks.

Other options are also quite effective. For example, each support can stand on a separate concrete base or on a strip fence foundation, which is laid along the perimeter of the site and continues under the entrance structures. This solidity ensures high strength of the entire fencing system, including the gate and wicket entrance.

Design option and diagram of a gate with a built-in wicket

In this case, laying the foundation strip with your own hands will require time, appropriate building material and strict implementation of the laying technology. Then, after all this work is completed, you won’t have to redo the rickety, sagging swing doors and gates after the winter. The simplest is a frame frame with a solid backing welded to it without any additional decorations. They just coat it with bitumen varnish.

However, such metal structures are not found so often and, as a rule, they are used for arranging a summer house, rather than a garden plot of a city house.

The trend of recent years is swinging facade structures with openwork bent elements and magnificent hot forging details. Today you won’t surprise anyone with gates made of forged metal. They are installed, first of all, not for arranging a summer house, but for a fashionable cottage or country estate.

Design option for a built-in forged gate

They prompted the resumption of the ancient craft and the emergence of new modern technologies that imitate the elements of forging. Such doors with decorative lathing are durable and of very high quality. They are expensive, but they are a fairly reliable investment that will be useful to more than one generation of owners.

Installation of such gates can be successfully done with your own hands by welding or using bolted fasteners. Initially, the frame frame is welded, which should be 2–3 cm narrower than the entrance opening. Then, having laid it on a flat horizontal surface, it is strengthened in the middle with a jumper, the role of which can be played by a decorative detail.

In accordance with the pre-designed pattern of the gate, cast decorations are laid out within the frame.

As long as they are not secured, they can be rearranged in search of the most attractive option. Having found it, the decorative elements are secured, and the welding seams are processed with a grinder's grinding wheel. The lock, latch, or deadbolt can be attached to the door once it is suspended from the structural support. After cleaning, it is coated with primer and paint.

There are also double-leaf swing gates that contain the best qualities of various materials. For example, a steel corner is used to strengthen the frame, and the frame is complemented with forged decorative elements. If the owner wants passers-by not to see what is happening in the yard of the dacha or estate, then the interior space is filled with corrugated board or wood. There are a lot of design options to express the tastes and preferences of the owner.