Decorative tree with your own. How to make an artificial tree with your own hands: the best ideas for decorating a room. Preparing the necessary materials

All photos from the article

What can you use to make a decorative tree on the wall? In this article we will get acquainted with several ideas for decorating living rooms using stylized images and relief figures of trees on the walls. In addition, we learn that decor can be made not only beautiful, but also functional. So, let's go.

Design principles

Let's start with a short excursion into theory.

It’s useful to know if you want to use the decor of a room to adjust its visual perception:

• A tall tree silhouette image with a small width will make your ceiling appear taller, but will visually reduce the horizontal size of the wall.
• Wide and spreading decorative weeping trees or an image of a low grove the width of the entire wall will provide the opposite effect: the wall will appear wider and lower.
• The predominance of light colors in the background will make the room as a whole more spacious.
• The opposite is also true: a light pattern on a dark background will make the room appear more compact.

However: dark walls with a light ceiling dramatically increase the apparent height of the room.

Flat images

The simplest scenario is a one-color pattern applied to the wall. You can get it in several ways.

Dye

Even if you are completely deprived of artistic talent, transferring the silhouette of an existing image to the wall will not be a problem.

Here are a couple of the most obvious solutions:

1. Divide the printed picture of a tree into squares of the same size.. Draw the same number of squares on a constant scale across the entire wall. Transfer the outline from the sheet to the wall, filling square by square.
2. Use a simple projector - a lamp with a reflector - to project a silhouette onto the wall.. Fix the sketch of the silhouette with tape on a vertically installed glass.

How to make the contours of a single-color drawing as clear as possible? It's as easy as pie: use masking tape. First, cover the outside of the image with it and paint over it; then repeat the operation, protecting the dried one with tape.

Outline pictures

Instead of dye, you can use ready-made paper and vinyl applications. They are sold with an adhesive layer already applied; Simply peel off the protective glossy paper and the drawing can be glued to the wall.

Note: rough coatings with low adhesion (including water-based paint and lime) must first be primed with acrylic penetrating primer.
In particularly advanced cases, PVA glue is applied to the back surface of the application.

Relief images

Of course, they look much more convincing than flat ones; however, creating a relief picture with your own hands will be noticeably more difficult. What could serve as material for it?

Textured plaster

This is the name of a plaster composition with the addition of large mineral grains, which, when rubbed, leave deep scratches in it, imitating the natural unevenness of various natural surfaces.

The acrylic mass (a more durable cement composition should not be used indoors) is applied inside the contour transferred to the wall and limited with masking tape with a spatula; texture is imparted to the plaster by parallel or chaotic movements of the trowel. Then the edges are cleaned with a knife.

After forming the relief silhouette, the dried coating can be painted with any water-soluble paints; As an option, you can pre-mix the acrylic mass with the pigment.

A more complex option is to form a full-fledged complex three-dimensional image using a narrow spatula and knife.

Ecology of knowledge. Interior design: Do you want to decorate your house or garden in an original way? Try to make a topiary with your own hands - a decorative miracle tree in the form of a whimsical fantasy ball on a high leg, also called the tree of happiness.

Do you want to decorate your house or garden in an original way? Try to make a topiary with your own hands - a decorative miracle tree in the form of a whimsical fantasy ball on a high leg, also called the tree of happiness.

Domesticated artificial topiaries are relatives of living topiary sculptures. Trimming the plants in your summer cottage to shape requires a lot of skill, but absolutely anyone can grow their own tree of happiness.

Buying a ready-made tree, and even in the most luxurious design from amethyst, citrine, coral or crystal, will not be difficult, but is it really possible to buy happiness?It's in our hands! It is with them that we will “sculpt” our happiness.

They create topiary from a wide variety of natural and decorative materials - fresh and artificial flowers, coffee beans, beautiful shells, pebbles, dried flowers, paper, sweets, cocktail umbrellas...

Topiary can serve as an imitation of a real plant, or take on completely fabulous shapes and colors. The sizes of topiary range from miniature dwarf compositions a la bonsai to the size of large indoor trees. An excellent gift option is fresh fruit topiary. But such a masterpiece cannot boast of durability. Topiaries made from aromatic plants are very popular, serving not only as an excellent interior decoration, but also filling the air with wonderful aromas. Learning to make topiary: the “anatomy” of the tree of happiness Mastering the art of creating homemade topiary is not difficult. Even a beginner in handmade crafts can cope with this task perfectly. In addition, all the materials necessary for topiary are affordable and can always be found on sale.

To make topiary you will need:

Potty

The diameter of the pot should not exceed the diameter of the crown ball. You can purchase a ready-made pot or make it yourself from a container of the desired shape, and then paint it, cover it with fabric, or decorate it in some other original way. In fact, choosing a pot that is suitable for the style and color of the product is not an easy task, so if you first purchased a pot, most likely you will have to come up with a composition to match it.

Crown ball

To create a crown you will need a plastic or paper ball. You can make a paper ball from crumpled paper or newspapers, and then coat the ball with paste or wrap it with thread. Rubber balls are more difficult to use because they lose their shape when pierced. If the decorative elements will not be glued, but stuck in, a foam ball will be perfect for floral arrangements.

Stick for the trunk

A branch or any suitable stick, for example, a stick from blinds, which is subsequently painted or wrapped with ribbons, will do. It is advisable to choose a longer stick, because it will be attached almost to the base in the pot and a ball will be placed on it. A trunk that is too short can ruin the entire composition.

Glue

Any all-purpose glue will work fine. For individual elements you may need super glue, a glue gun or liquid nails.

Cement, gypsum, alabaster

We seal the hole in the bottom of the pot. Having prepared the solution, quickly stir it, pour it into the pot and immediately insert the stick-trunk until the solution hardens. The cement will prevent the crown ball from outweighing the pot. But if the pot is already quite heavy, the cement can be replaced with polyurethane foam.

Pebbles, sand, shells, colored salt, beans...

Glued on top of the mortar at the base of the tree.

Accessories for decorating wood

Dried flowers, artificial flowers, shells, pebbles, pine cones, bows, cocktail umbrellas, coffee beans, beans, pistachios, shells, corrugated paper and anything else that comes to your mind.

Photo master class:

• Necessary materials:
• 100 grams of roasted coffee beans in a sippy cup (available at an office supply store)
• wash brush for whitewashing (can be bought at a hardware store, hardware store or market)
• 1 plastic ball, 8-9 cm in diameter (such balls are widely used in children's playrooms and are sold individually on the market)
• scissors
• spool of brown thread
• 2 rubber bands for money
• universal transparent glue
• clear super glue
• a glass of sand, cement or gypsum
• wooden stick or branch 20 cm long and 1.5-2 cm thick
• twine rope 50 cm

How to do:

1. Using scissors, we carefully make one hole in a plastic ball, where a little later we will insert the “trunk” of our tree.

2. We take a whitewash brush and pull out a strand of sponge from it, or, after removing the ropes, we completely disassemble the brush.

3. Using a money elastic band, secure the sponge thread at one end of the branch. Lubricate the branch with universal glue and spirally glue the future “trunk” with thread. From the other end of the branch, we again fix the thread with a money elastic band and insert the “trunk” into the ball, which will play the role of a crown.

4. Using universal glue, we glue the ball with brown threads to greatly facilitate and speed up the process of gluing the coffee beans. To paste over the ball, you can also use strands from a whitewash brush, but using threads is much better and easier.

5. Now we proceed to pasting the ball with the first layer of coffee beans. For this we need transparent super glue. It is advisable to glue the grains in different orders - with the groove down, then up. Apply glue directly to each grain. You should use super glue very carefully, since it leaves white spots on dark grains, quickly sticks firmly to your hands and has a pungent odor, so it is advisable to “grow” your tree of happiness in a well-ventilated area. You can also use a glue gun or liquid nails.

6. One layer of grains will not be enough, so be sure to make a second one. To give the surface texture greater relief, do not forget to alternate the smooth side of the grains with the one with the groove.

7. It's time to start creating an original pot for our tree of happiness. First of all, cut off a little bast from the brush, the length of which should be slightly larger than the diameter of the bottom of the glass. Then we lubricate the bottom with universal glue and place it on the prepared washcloth. We cut off the threads protruding beyond the edges of the bottom.

8. Now we cut the washcloth from the brush so that it is 3 cm longer than the height of the glass. Apply universal glue to the side surface of the glass, 2.5-3 cm short of the top, and gradually cover the glass with the prepared washcloth. We tie the glued glass at the bottom with twine and trim off the excess edges. We trim the ends and the top so that the threads are approximately 2 cm above the edge of the glass.

9. Using universal glue, we paste long strands of sponge around the funnel in a circle and screw the tree trunk into it.

Artificial trees can be considered an excellent decorative element for any room. They always remain ever-blooming and decorate the house. They can be used as a gift. You can make decorative trees with your own hands in any variation. However, before starting work, you should decide what type of wood will need to be used as a base.

Making an ever-blooming tree

To carry out the work, you will need to prepare superglue, corrugated paper, PVA glue, and a knitting needle. The master will also need any object that resembles a trunk. It is important to prepare the pot too. Before starting work, stock up on plaster. To make decorative trees with your own hands, you need to take corrugated paper and make several strips out of it. The size of the flowers will depend on the width of these blanks; in this case, this parameter varies from 1 to 2 cm. If corrugated paper is not available, it can be replaced with napkins or tissue paper.

Making flowers

First you need to cut the green squares that will form the basis of the leaves. The squares should have a side equal to 4 centimeters. Next, you can start making flowers; you need to fold the paper one by one, adding glue. You can fold each strip at an angle of 90 degrees, but it is permissible to experiment, since different bending angles of the strip will affect the shape of the flower. A regular stick and ball will do for this. The latter needs to be fixed on a stick using superglue or tape.

Ball assembly

Next, using PVA glue, you can begin to attach the roses to the ball. If you decide to make decorative trees yourself, the master class presented in the article will help you. When all the flowers are secured, you can add leaves, strengthening them in any order. Now you need to “plant” the tree. For this, a pot must be used, which can be replaced with a cup. The entire space must be filled with plaster, which is diluted with water until the mixture becomes thick. Now the structure can be seated in a pot; it is preferable to install everything against the wall so that it is possible to support the structure. The tree must be left in this state until the plaster hardens. The plaster should then be covered with green fiber or painted with acrylic paint. By making decorative trees with your own hands, you can decorate them as you wish. You can use satin ribbons for this.

Making a tree from fabric flowers

This tree is very simple to make, you will need some fabric, a bamboo stick, a pot, buttons and ribbons, and chalk. A needle, as well as thread and scissors, will come in handy. Make sure you have a floral sponge and padding polyester. You will need to cut out circles from the fabric, which are most easily drawn using a mug. Next, the circles are stuffed with padding polyester and sewn together.

Barrel manufacturing and assembly

Now comes the turn of the bamboo stick, which needs to be wrapped with green tape. When you make decorative trees with your own hands, the next step is to insert a floral sponge into the pot and install a stick in it. Next, use glue to fix the moss, and then glue the flower to the stick. If you wish, you can also decorate the pot with ribbon and then add a button.

Making coffee tree

To carry out the work, you need to prepare a ball, PVA glue, threads, superglue, a pot and a stick for the barrel, as well as tape, plaster and coffee beans. First you will need to prepare a foam ball. It needs to be wrapped with threads and the grains attached to the surface of the workpiece; glue should be used. It is initially recommended to wrap the spherical element with threads, the ends of which can be attached with glue. Next, you should designate the place where the barrel will be installed. You need to leave a small circle, the diameter of which is 1 cm, where the threads and grains will be glued. If you decide to make a decorative tree with your own hands, then at the next stage you need to start gluing the grains. For this, it is preferable to use PVA glue, since superglue can corrode foam.

It is preferable to apply glue to small areas, each of which should be covered with grains. In this way, you will need to continue until the entire surface is covered. There is no need to press the elements too hard. It is better to let the structure dry after pasting half the ball, which will take about half an hour, only after that you can continue. After the first layer has been pasted and the composition has dried, you can move on to the second layer. This time you can use superglue, the grains should be turned with the convex side down. It is better to strengthen them in those places where gaps are visible. It is not necessary to coat each element with glue; you can squeeze the composition onto a newspaper, and then dip the grains in it.

Now the entire structure must be left to dry completely. When making a decorative tree with your own hands, at the final stage you need to leave gaps for the trunk, which are then sealed with grains. Next, a pot is prepared; in this case, it is preferable to use one made of glass. In order for the wood to hold up well, you must also use gypsum. You can add some coffee grounds to it when preparing it, so you will achieve a brown color. When the plaster is poured, you need to install the tree in it and lean it against the wall. The tree should remain in this state overnight. You can sprinkle everything on top with hazelnuts. You can decorate the trunk as you wish; satin ribbon is often used for this.

Another option for making wood

Before making decorative trees with your own hands, you need to familiarize yourself with the technology of the work. In this case, you will need polystyrene foam, yarn, wire, green coffee, pliers, masking tape, a pot or other utensils. As in the previous case, the pot will need to be filled with plaster. But first, prepare a foam ball, which you can make yourself, and then wrap it with thick threads. You will need several of these balls; in this example, we will consider an option in which there are six of them.

Next, you can begin making the base; in this case, it is recommended to use not wire, but an electrical aluminum wire, which has 3 cores at the base. The lower part of the tree will consist of three veins, while, rising higher, the trunk will have several branches and individual knots. If you are thinking about how to make a decorative tree with your own hands, then the next step is to bend the wire as your imagination requires. This will allow you to get separate branches. You can strengthen them together using masking tape. Pliers will allow you to cut the wire, but you can remove the braiding as much as you want to insert foam balls. In order for the barrel to be as soft as possible, you need to use masking tape and wrap it around the element. In order to fix it better, you can use glue.

Now you can place the previously obtained balls on the frame. You need to pour plaster into the pot and install the tree in it. Once the plaster has hardened, you can decorate the tree as desired. Now you can stick on the second layer of coffee beans. When making decorative trees for your home with your own hands, you can slightly change the design, using technology that you develop yourself as the basis for the work.

Finally

Trees made using the method described above can be made in different modifications. For example, if you do not use the barrel, but only the balls themselves with grains glued to them, then these elements can be fixed to the surface of the canvas. The latter can be made into a real painting. In order to make a decorative tree on the wall with your own hands, you will need to prepare a sheet of plywood. Afterwards the structure must be framed.

Did you know that decorative trees of “natural origin” may not always be appropriate in the home? This applies to both large private properties and small apartments. For example, instead of evergreen shrubs or dwarf trees in the garden, you can build several large “century-old” artificial ornamental trees, which will then be used both as architectural garden decoration and as supports for vertical gardening.

For example, you can order it from frame polymer concrete. Today there are companies specializing in creating such trees - strong, tall, and capable of supporting the weight of natural plants. Weaving or climbing perennials will look especially impressive on their trunks.

Such ornamental trees are good for private areas; But what should the “unfortunate” owners of apartments who do not yet have their own plot of land do? There is always a solution: today you can “grow” a tree even in your small kitchen!

DIY coffee tree

If you want to somehow diversify your interior (especially caring housewives strive for this), then you can try to make a decorative tree with your own hands - in this case, there is no special waste, and you are guaranteed pleasure from the process and the final result!

So, how to make a decorative tree at home? To create a coffee tree you need the following materials:

• tree branch (any);
• yarn and regular sewing threads in green or yellow;
• balloon;
• bean grains;
• silicate glue (ordinary stationery glue can be used, but not PVA);
• glue gun;
• tube of Moment glue;
• flower pot or flowerpot;
• a handful of small stones.

All is ready? Then go ahead!

Frame

The balloon needs to be inflated and secured with thread, and then wrapped with yarn (remember how our mothers and grandmothers used to make decorative lampshades for lamps?). In principle, you can take any yarn, as well as its color - but preferably darker, so that the color of the “wood” does not contrast with the color of the “coffee beans”. You should try to wind the yarn as tightly as possible - you will subsequently have to glue the “grains” onto this frame, so it must be strong enough.

After winding the yarn onto the ball, it should be thoroughly coated with office glue - PVA glue will not work, because it takes a very long time to dry and leaves behind white stains. The coated ball must be dried (to do this, use a hair dryer with a warm stream of air) so that the glue sets faster. After making sure that the glue has completely dried, the ball can be “deflated” and pulled out through the small hole cut. “Krona” is already ready.

By the way, some fans prefer to make decorative trees with their own hands, using not balloons, but children's plastic balls (the kind you can find in playrooms today). True, the ball will be bright, so you will have to wrap it in several layers of nylon stocking or thick dark fabric so that the bright color does not show through the bean grains. You can buy such a ball at any kiosk with children's toys - they are sold individually.

Trunk

Almost any branch is suitable for the trunk, as long as it is strong and stable. If you have a twig of an apple tree, that’s generally great: the apple bark itself looks great, and you don’t have to decorate it further.

So, the “crown” is already there, and so is the “trunk”. You need to attach it to the frame as quickly as possible and very carefully, since the frame is quite fragile. To do this, you need to insert a twig into the cut hole and secure it to the “top of the head” (a drop of Moment glue should be placed on the tip of the twig), and fill the hole itself with sealant from a gun. Next, you will have to wait until both the glue and the sealant dry.

Crown

This is perhaps the most important of all stages of creating a decorative tree. You should have a glue gun and bean seeds on hand. The beans must be dark to give the appearance of a coffee tree. Glue will have to be dripped onto each bean so that there is no glue left between the grains. And, of course, the beans need to be glued in a dense layer - in order or chaotically, this is how your imagination on the topic of “indoor decorative trees” will manifest itself.

Stand

We use an ordinary flower pot as a stand (some aesthetes prefer beauty in everything, so they take beautiful ones instead of pots). The “trunk” is secured with small stones. And for greater beauty, they can also be decorated with yellow or green sewing threads, sprinkled with regular hairspray.

That's basically it. Such decorative trees can be placed in any corner of your apartment - and even given to friends! You'll see, they will definitely appreciate your craft!

Oh, by the way: if you are an avid coffee drinker, you can replace the beans with real coffee beans - your tree will emit a real coffee smell!

Decorative trees are considered a worthy decoration for a home. They are appropriate in any interior; you just need to think in advance about the color scheme that fits into the finished design project. Ornamental trees do not require special conditions of maintenance and care. They do not need to be watered as they are artificial plants. These decorative items are freely sold in stores, but it is better to make topiary with your own hands. It will take some time to make it, but in the end you will get a unique decorative tree that fits perfectly into the existing interior of the room. And it’s better to build a topiary yourself, because according to the ancient Chinese teachings of Feng Shui, this tree brings joy to the house. By making a decorative tree, a person charges it. According to legend, topiary can only bring happiness to its creator.

Topiary: history of appearance and significance in modern interiors

The word topiary or topiary comes from the term “topia” - a decorative garden plot. The concept came from Ancient Rome and meant various figures carved from the crowns of trees or bushes. Ancient Roman civilization disappeared, but the idea of ​​beautifully decorating gardens was picked up by the Catholic Church. Then topiary entered social life. Their heyday came in the 17th century: it was then that decorative trees appeared in the residences of rulers of states, incl. and in the Russian Empire. Then they were forgotten, but in the 20th century topiaries became popular again. Now they were no longer used to decorate gardens and palace walls, but were planted in pots. Today, topiaries are no longer planted. They can be made from any materials. Topiaries are made in the most bizarre shapes and colors, often combining materials in quite controversial ways. They are otherwise called trees of happiness, believing that they bring joy to the house. They can be made from:

• coffee beans;
• walnuts;
• fir cones;
• straw;
• sweets;
• napkins;
• silk ribbons;
• plastic bags, etc.

Where to start assembling wood

Assembling a topiary must begin with planning the appearance of the future tree of happiness and finding the necessary parts. The appearance of topiary is determined by the style of the interior for which it is made. First, find the materials necessary to construct the base of the tree. In any case, you will need tape, glue, colored paper, polystyrene foam, polyurethane foam, etc. The list of parts is limited only by the imagination of the creator. After collecting the necessary things, you can start creating a topiary. First, the barrel is assembled, because it is the basis of topiary. Moreover, it must not only be strengthened, but also covered with varnish or paint. Then one end of the trunk is attached to a pot, stone or shell, and a ball is hung on the other, which will later become the crown of the tree of happiness. It is best to use glue to hold all the parts of the topiary together.

The basis

To construct the basis of the tree of happiness, whatever is at hand at that moment will do. To make a base from newspapers, you first need to crumple them thoroughly, and only then form a sphere according to the given parameters. Newspapers are crumpled and pressed tightly, after which they are wrapped with tape. The base can also be made from newspaper clippings, but in this case they should be placed in a plastic bag. If you need to make a small base from padding polyester, you first need to compact it into a sock or stocking, then give it the required shape and wind it tightly with sewing thread. It’s even better to make this base from polystyrene foam, using ordinary packaging from household appliances. But polystyrene foam crumbles and is inconvenient to roll into a ball, so this base is not very popular. In addition to those mentioned above, the following materials can become the basis of topiary:

• polyurethane foam;
• Knitting thread;
• papier-mâché, etc.

Trunk

The trunk of the tree of happiness connects the base with the crown, so it must be strong and stable. Its role can be ordinary wire, secured with artistic tape, twine or plastic. To make the product more realistic, this trunk can be made from a wooden branch or wood chips. But first this branch must be cleared of bark, covered with varnish and stain. If you are making a low topiary, then as a trunk you can take a popsicle stick, sushi sticks or wooden skewers fastened together. The color and type of trunk depends on the material of the base and crown. For topiary with coffee beans, white or brown colors are suitable. A curved trunk for a European tree can only be made from wire. You can also take any material that is approximately suitable for the trunk of a topiary, shape it and fill it with plaster.

Crown

To make a topiary crown, absolutely any materials that are currently at hand are suitable. To do this, you can take paper napkins, corrugated paper, folded origami, nylon tapes, etc. Then the crown needs to be decorated. To do this, take fir cones, real seashells, coffee beans, artificial flowers, etc. The crown is the main accent of the tree of happiness, so its design must be taken very seriously. The trunk and stand only emphasize the overall theme of the topiary, so it is advisable to first decide on the material for the crown, and only then design the remaining parts of the tree. But the topiary trunk may not be able to withstand a crown that is too large, so it should not be overloaded. Only the stand of the tree of happiness can be decorated with some elements.

Stand

As a stand for topiary, you can take an ordinary flower pot, a large flat stone or an iron bucket, decorate them beautifully and place them under the crown. The decor of the tree of happiness stand can be anything. It is decorated using the decoupage technique, decorated with lace or bright unusual shreds. You can stick stones, shells and artificial flowers on the stand. This topiary element is a semantic continuation of the crown, so its design must be based on the existing elements of the decorative product. If the tree is decorated in a marine style, then shells and multi-colored pebbles will be appropriate, and for a topiary in a romantic style you will need lace and hearts made of colored paper. The size of the tree's crown should be larger than its stand in order for the composition to look harmonious.

Wood making workshops

Making topiary with your own hands is easy. To do this, you do not need to have artistic taste or designer education. The ideal tree of happiness is decorated intuitively from available materials. There are many master classes on this topic on the Internet, some of them are presented below, but you should not follow these instructions step by step. According to Feng Shui, topiary quickly and effectively activates any sector of an apartment or house, instantly filling it with the necessary energy. But for it to work properly, it must be decorated with the necessary elements. To normalize family relationships, jasper or amazonite should be glued to the topiary stand. A tree with a tiger's eye, charoite or turquoise will help you climb the career ladder. And to improve your overall financial situation, you need to decorate your topiary with jet or a hawk’s eye.

From coffee beans

For this topiary, you need to take high-quality large coffee beans and stick them on the base for the crown, laying them out with the central strip down. The ball is completely covered. To do this, it is better to take a glue gun, although you can do without it, using regular glue from a tube. When the ball is completely sealed, take a plastic tube, which is sealed along the entire length with double-sided tape, departing 2-3 cm from both edges. Satin ribbon, fabric or corrugated paper of the desired color is glued to the tape. Then you need to dilute the alabaster and pour the resulting mixture into a pot or iron bucket. Then they insert the barrel into this mixture and wait for the alabaster to harden. After the mixture has hardened, its surface is spread with coffee beans in 2-3 layers. The finished crown is glued to the top of the trunk itself.

The resulting topiary can be decorated with an elegant bow or jewelry.

From the cones

Do-it-yourself topiary from cones is made according to a similar scheme. Small half-opened pine cones are glued onto the foam ball at small intervals from each other. If the gaps are too large, they can be filled with acorns or chestnuts. For additional fixation of elements, you can use golden or brown threads. To make a trunk, you need to put together several (up to 10) bamboo skewers, wrap them with thick white or brown thread, leaving open areas along the edges of the sticks. Then you need to dilute the alabaster with water or take a ready-made cement mixture, pour it into a flower pot and insert the tree trunk into the base. When the mixture hardens, it is decorated with pine needles or sisal, a fully formed crown of the tree of happiness is attached to the trunk, and the pot is decorated with a satin or openwork ribbon.

From satin ribbons and other fabrics

As a base for satin ribbon topiary, you can take a foam sphere or a ball of crumpled newspapers, secured with thick threads dipped in PVA glue. Then you need to take satin ribbons of any color, roll them into small rolls, first bending the ribbons at a right angle. You need to bend the satin ribbon several times until it runs out of length. The result of these actions should be a rose bud. Upon completion of production, it is necessary to sew all the petals with a thin silk thread at the base. The number of such roses is determined by the size of the base. Usually 20-30 flowers are required. Then they decorate the crown of the topiary. You can take an ordinary twig as a trunk for such a tree, and use a clay flower pot for the stand. The stand and tree trunk should be decorated with elegant green leaves made of satin ribbons or silk.

Corrugated paper

First you need to take a round foam ball. Then you need to make roses from corrugated paper. If they are very large, then there will be a lot of free space between the flowers that will need to be covered with something, so it is better to make these roses medium-sized. For one small topiary you will need 35-45 roses. To do this, it is better to take paper of different colors in order to alternate the shades of roses on the topiary in the future. The trunk for the tree of happiness can be made from traditional sushi sticks, and ordinary polystyrene can be used as soil. Alabaster is difficult to make, but foam is easy to find. Only the barrel needs to be inserted into the foam base the first time. At the same time, you need to decorate the crown by gluing roses in a chaotic manner. Then the crown is attached to the trunk and the topiary is considered ready. If desired, the soil in the pot is covered with artificial grass, and the trunk of the tree is decorated with a bright bow.

The sea tree of happiness can be made from materials brought from the sea: pebbles, shells, dried crabs and pearls. They should be used to cover the base for the topiary crown. If there are only a few shells and pebbles, the space between them can be decorated with sisal, artificial starfish and marine-themed salt dough crafts. When making a topiary trunk, it is better to take sushi sticks decorated with satin ribbons of white, blue or sand color. As a stand for the tree of happiness, you should take a white flower pot, which can be decorated with artificial pearls, lace and small figures made of salt dough. Inside this pot you need to fill it with alabaster and insert the topiary trunk into this alabaster mixture. You can put sisal fibers, sea pebbles and shells on top of the frozen filling.

Money topiary made of coins and bills

This topiary is usually made from fake banknotes, but for decoration, you can attach real coins to the crown of a tree or stand. Of course, it is better to use rare, antique or foreign coins rather than ordinary ones. To begin with, each bill needs to be folded in half, slightly moving the edges, and then folded into an envelope, securing the uneven edges with double-sided tape. The number of bills depends on the size of the base ball, but traditionally about 20-25 bills are required. The trunk of the money tree can be made from twigs or sushi sticks, and a flowerpot can be used as a stand. The outside of the flowerpot can be decorated with special self-adhesive paper with images of money or lace. Alabaster is poured into the pot itself, the trunk is placed in it and wait for it to dry. After this, the topiary soil is laid out with coins, wood sawdust or decorative stones.

From dried flowers and fresh flowers

Making a tree from dried flowers is quite simple. You can decorate the base for the topiary crown with dried flowers and yellowed leaves, but the flowers and leaves taken for these purposes must be strong and dense, otherwise they will simply fall apart during work. Dried flowers are attached directly to the foam ball. A curved branch from the street is taken as a trunk, and an ordinary clay pot is turned into a stand. The inside of the pot is filled with alabaster, first fixing the trunk of the topiary. This trunk is inserted into the finished tree crown, and the dried alabaster is decorated with dry leaves and flowers. Topiary from fresh flowers is usually created by professional florists, but you can try making it at home yourself. To do this, you need to take rose buds, chamomile flowers, lilies or chrysanthemums, correctly and carefully cut off their stems and attach them to the base of the crown. Otherwise, the technique for producing a tree of happiness and decorating a topiary pot is similar to making it from dried flowers.