DIY New Year's deer for a festive atmosphere. How to make LED luminous figures with your own hands DIY deer from wire step by step

Deer #1

“I made him out of what was... la-la-la”

Now everyone is preparing for the New Year and Christmas, and there are many such deer at every step, almost in herds, in every store, and I’ve also seen them in pharmacies. Think. you noticed them too. Very cute fawns, but honestly I don’t dare buy one. I don’t even know how much this beautiful curly skein of wire with a garland inside costs. But to do it yourself... I found this idea interesting. Are we doing?

1) Wire, basically any kind. I had a coil of steel wire with a cross section of 0.9.

2) Garland. In principle, too, any - ideally if it is the color of the wire and with LEDs, then you can do whatever you want with the deer decor, in terms of fire safety. In my case, the cheapest one is Chinese, and it’s also green (it requires adhesive tape and metallic paint)

3) Any of the garland fasteners to the wire. This could be a thinner wire, super glue, tape, or thread. I used Lurex and occasionally superglue.

We start any work with a sketch. I have this silhouette of a deer and antlers.

Now you need to try to make the silhouette using wire in 2 copies as close as possible to the sketch. That is, we should get 2 silhouettes of a deer and 2 antlers.

We fasten both silhouettes in the area of ​​the muzzle and tail end to end, like this.

We wrap the antlers with wire, and we get something similar to a deer. Now you need to increase the volume. We twist the wire first around the legs and muzzle:

Those with the perfect deer-colored garland skip the next step. And the owners of more perverted garlands move on to coloring. Before painting the garland, you need to cover the light bulbs with window tape. I used metallic spray paint.

Then you need to carefully remove the tape. It is best to cut and tear the tape and carefully release the light bulb. I naively pulled the tape several times, pulling out the light bulbs. Now my deer's antlers don't light up, unfortunately.

We attach the garland. I started with the horns, attaching the bulbs with Lurex and super glue to the wire, wrapping the garland itself around the horns. The remaining part was pushed into the body and head, the cord with a plug was brought out from the side of the deer.

We wrap the deer with wire in those places where there are large gaps and decorate it. As for the decor, I didn’t bother too much, I wrapped it in lurex (since this was the first thing that came to hand) and a Christmas tree garland in the form of beads. This is the kind of deer I got.

What can you wrap it with? For these purposes, you can take a thinner wire. If the garland is LED, then you can wrap it with any beautiful threads. or ugly, and then spray with spray paint. A white woolen thread also looks beautiful, the deer looks so furry, but it’s better not to do that with a Chinese garland. I am sure that you will come up with many more ways to decorate.

Deer #2

Naturally, according to tradition, we are waiting for Grandfather Frost for the New Year. But maybe this time Santa will visit us too? We do not mind)))
�? they even made him a deer. Like this:

It all started with 2 pieces of old aluminum wire that I found in my closet. You also needed: a skein of gray thread (children's acrylic), white mohair, PVA glue, tape, scissors, pliers.
To begin with, we give the wire the shape we need and connect it at the joints using tape. We get the following construction:

Now we take the gray threads and, lubricating small sections with glue, carefully and tightly wind them. Then we twist small parts from the wire: tail, ears and horns. I won’t show you the tail - I forgot to take a photo during the process, but here are the ears and horns:

We wrap the horns with the first layer of white mohair, and the ears with a layer of gray acrylic. We fasten them together with a thread, and then we tie them, again, with thread, to the head of our deer. Now we wrap the horns with another layer of mohair.

We cut off the excess threads.
The result is this little animal:
The most interesting thing remains: we randomly wrap a garland around the frame.

Deer #3

�? a few outlines of deer, maybe they will help you create your New Year's Miracle!

http://www.domohozyajka.com

We make a deer from scrap materials. If you don’t know how to make a New Year’s deer, choose any method and raw materials that are available to you and get down to business with us.

Wire deer

The most beautiful three-dimensional deer is made from wire and tape. To make such a beauty with our own hands, we will need:

• thick copper wire.
• scissors;
• pliers;
• toothpicks;
• polyethylene tape film;

Master Class

We begin to twist the frame with our own hands from the butt, folding a large piece of wire in half. We make the hind legs, symmetrically raise both ends to the stomach, the front legs, and the chest. From this point, one end forms the head and neck, and the other cuts circles around it. We attach another piece of wire to the butt and leave the short end - the tail, the long end becomes the spine and is attached to the neck.

You can, of course, make the insides out of straw, cardboard or felt scraps, but in a modern apartment there is always the most ownerless polyethylene. We make large wads of thin film with our own hands for the torso and neck; long flagella for the legs can be wound onto toothpicks. We secure them with narrow tape and wrap them with wide tape.

We make the horns and ear from two pieces of wire symmetrically.

We try on the horns, remove them and wrap them with tape.

We screw the horns into place, wrap the head and tail with tape. The result was a white reindeer.

Deer made from plastic bottles

What our craftsmen did with their own hands from plastic bottles. The material is always available, malleable and free. Now it’s the turn of the ungulates. How to make a New Year's deer from it? In order to make such a charming deer with your own hands, you will need only three plastic bottles: one and a half liter, a large 5 liter and any for the ears.

• Burn holes in a large plastic bottle for the legs, and in a small one for the neck.
• Drive 4 sticks into the ground and place the torso on them.
• Put your neck in, put your head on.
• Attach the ears cut from the third plastic bottle with a stapler.
• Make horns from tree branches. You can make them from cardboard, but not for the street.
• Paint a fawn using plastic bottles and throw a bunch of straw near its hooves.

Felt deer

To sew a felt deer you will need:

• pieces of felt in three colors;
• threads, needle;
• lace;
• a little filler;
• lace.

• We start sewing the tilde head from a felt pattern. Immediately sew a nose onto the muzzle, sew a mouth using red thread and draw eyes.
• We sew together two halves of felt, not forgetting to insert the felt antlers, lace and filling between them. If you want a rigid felt craft, insert a cardboard frame inside.

Straw deer

Well, there’s a lot of straw in the village. The same amount as there are plastic bottles in the city. It is interesting to make a figure of a deer from wood and straw with your children.

Make a frame from tree branches by tying them with rope.

Take bunches of straw and apply them to the branches, generously wrapping them around them with twine.

We make the ears from two identical bundles of straw, folded in half. The eyes will be made if large black beads or buttons (nuts, bottle caps, etc.) are glued or sewn to circles of cardboard, felt or a small plastic lid and secured with twine. Our handsome straw man's horns are made from bare tree branches.

Cardboard deer

It's scary when the head of a dead deer hangs on the wall. This means that either the owner killed a beautiful animal with his own hands, or... in any case, there is a corpse in front of you. But when you see a deer’s head that someone has made with their own hands from wood or cardboard, a feeling of admiration, respect and slight envy appears.

Don't be jealous, you can do no worse. This video shows very quickly all the elements that make up the face, neck and horns. The good thing about the video is that you can stop it and copy the craft. Then cut it out of cardboard, put it together into a puzzle with your own hands, attach it to a piece of wood, and hang it on the wall.

A couple of evenings - and under the tree you will find a forest deer, shining with all the colors of the rainbow. Together with the children we are making a deer named Olesh.

What do we need?

Strong wire that bends well;
pliers large and small;
scissors;
garland (for 100-150 light bulbs);
plastic bottles 0.5 l (5-6 pieces);
Super glue;
tape, narrow (1-2 skeins) and wide;
bubble wrap (aerial packaging, Bubble Wrap) – about 1.5 m2;
the smallest tinsel is silver in color (for our deer, about 45 cm high, it took 12 ribbons of 2.5 m each);
a flat piece of plastic (such as siding);
acrylic paint (for example, bronze);
construction brush 20 mm.

The first step is to make a wire frame. The head, neck and four legs are flat, and the body consists of two halves.

We fill the voids with plastic bottles (these are legs, torso, neck). If the bottles do not fit, cut off the top and bottom parts, cut lengthwise and roll to the desired diameter.

To fill the head, we use bubble wrap, rolled into a ball and secured with tape. We make the muzzle from part of a plastic bottle. We secure all this with tape.

Using bubble wrap, cut into strips 3-4 fingers wide, we “bandage” the deer. In some places it is necessary to “build muscle mass” (these are the chest, thighs and back). We correct Olesha’s figure and fix it with tape.

The ears and tail are made in the same way - the remains of the film, folded into a triangle and cut to the required length, are glued with tape.

Making horns is more difficult - you need a paper template. We trace the outline on a plastic plate and cut it out.

Using scissors, we make deep cuts on the deer's head and insert the antlers. For reliability, fill the cracks with superglue.

The horns can be painted, for example, with elegant bronze paint.

Now you need to wrap a garland around Olesha’s torso and secure it with tape. We leave a supply of wire for connecting to the network.

We decorate the base with tinsel using glue and tape. We camouflage each detail of the deer separately. We start with the ears and tail, followed by the legs and head.

Attention! Superglue can glue your fingers together.

You need to start wrapping the ears and tail from the end, securing the tip of the tinsel with tape. Then we apply two strips of superglue on both sides and quickly but carefully place the tinsel, and again secure the tail with tape.

The head is “tinseled” in a special way: first the “fur” is glued between the ears, and then everything else.

The most difficult part was decorating the back of the head, cheeks and back. To ensure that the tinsel fits properly, we place it around the ears in figure eights, loops, hooking it under the chin. The same goes for the tail – loops of tinsel are pulled behind the legs, bandaging the deer crosswise.

The eyes and nose are made from ordinary caps - two from small medicine bottles and one from detergent.

The deer turned out to be fragile, like any Christmas tree decoration. But our Olesh is not a toy, he is a guest.

Attention! Unfortunately, Olesh cannot work for a long time - the garland gets hot, and the main material is plastic. It has been verified that the permissible duration of continuous operation of the garland is half an hour, always in the presence of adults.

A DIY New Year's deer is something you can make for decoration during the main winter holiday. Such a craft will definitely not go unnoticed, because a homemade deer always looks creative and beautiful.

Below we will describe step by step how to create various New Year's crafts and decorate the holiday with them. The deer stencil is made from cardboard, but if you don’t have it, you can use regular paper. The paper will make a large Christmas reindeer that you can hang next to the garlands.

So, the work flow is as follows:

1. When creating any stencil, it is important to draw the correct template. For those who are doing this for the first time, it is recommended to choose a simple drawing, since elements such as, say, the head or horns of an animal will be quite difficult to draw. So, after the sketch of the future craft has been selected, you can begin to create the stencil itself.
2. When drawing, it is recommended to use a pencil, as it can be erased at any time. Once a person is happy with their graphic design, they can use a marker to trace its outline. As an alternative, you can use a ready-made template by printing it from the Internet. Or another way: you can take a stamp from a press. However, you need to take into account the fact that usually such seals are small, so if you want to create a large stencil, it is better to draw the outline yourself.
3. Now you need to decide what kind of paper stencil will be, single-layer or multi-layer. If the future craft will be black and white, then it is recommended to make one layer. At the toy making factory, stencils are made multi-layered, because this way the craft will be stronger. You can also get more sophisticated and create such a craft from foam plastic.
4. The drawn and colored image on paper (cardboard) must be copied onto thin tracing paper. It is important to ensure that all its details are reflected well on the tracing paper. Now you need to draw the outline of the drawing again. You can use copy paper instead of tracing paper.
5. At the last stage, you need to use a penknife to cut out the stencil. This should be done strictly along the contour.

Tip: Stencil Christmas tree decorations are made of plastic. A hole is made at their top through which the thread is threaded. The toy can be hung on a Christmas tree.

Gallery: DIY New Year's deer (25 photos)

New Year's deer: ideas (video)

DIY paper deer head: how to make?

A large paper deer will certainly decorate the New Year!

You need to do it like this:

1. First you need to collect everything you need: colored and white paper, scissors, a ruler, a sharp device such as scissors or a knitting needle, tape and glue.
2. To create such a craft you will need about 15 sheets of paper.
3. The work begins with the selection of beautiful drawings. It must be depicted on paper and cut out. Now all the images need to be bent so that they can be glued together.
4. To press the groove, use a ruler. It must be applied to the bend line and drawn along it with a sharp object.
5. The parts must be glued carefully so that the glue does not stain the paper.
6. You need to secure a thread or rope in place of the animal's neck. This can be done using a small piece of tape.

How to make a deer from wire: diagram

Getting a beautiful wire Christmas toy requires some creativity and sophistication.

So, the action plan is as follows:

1. First, it is important to decide what size the deer will be and why it is being made. If you want to make a New Year's toy, just take one sheet of A4 paper to create a layout. But you can also make a large deer from wire, which you can put on the street and decorate with a garland. It will look great! The choice remains with the creator, especially since the operating scheme is the same.
2. Once the size has been chosen, you can begin creating the layout. On a sheet of paper you need to draw the profile of the animal, the horns are drawn on a separate sheet. This is necessary for wire modeling.
3. Now you need to use wire to perform precise modeling according to the drawing. You can apply it to the paper to prevent deviations. The wire needs to be twisted. Two identical wire simulations should be made.
4. Now both simulations should be fastened together. It is recommended to do this in the tail area by twisting the wire. As for the other sections of the deer, to hold them together you need to cut a small piece of wire and use it as a hook for the two parts. This way, there will be a distance between the two wire models and the toy will not be flat.
5. The horns of the animal are wrapped with wire to the head, after which the entire deer must be wrapped in it. It is recommended to make gentle circular movements with this material.
6. If you want to give your craft an LED effect, you can attach a garland to it. You will get a beautiful glowing deer made of wire.

Christmas reindeer made of cardboard: how to make?

1. First you need to draw a model of the future deer on cardboard. The head of this animal made from this material looks very beautiful, so the method of creating it will be described below.
2. It is recommended to print the templates on a printer first. In each part, it is important to make a strip in the center - this is the future cut for fastening.
3. Each paper piece must be attached to the cardboard using double-sided tape. It is not recommended to use glue for this.
4. Then each part must be carefully cut out along the contour with scissors.
5. After this, you can make slits in them. For convenience, it is better to use a knife.

Once the slots are ready, you can begin assembling the deer. The parts are attached one to one.

Deer Costume: Simple Pattern

In handicrafts, you can follow fashion trends, or you can be creative and create a toy that no one else has! A New Year's deer is, of course, great. However, even it can be brought to perfection by decorating with available materials. Below we will talk about how to make a festive costume for this New Year's toy.

As “clothing” for a deer toy, you can use cotton wool, lollipop packaging, Christmas tree rain, knitting yarn, and so on. There are a lot of ideas - if only there was a desire!

1. To do this you will need glue, cotton wool and colorful Christmas tree rain. You can also use glitter.
2. First you need to tear the cotton wool into small pieces so that it resembles snow. Then, using glue, you need to attach it with glitter and rain. There is no need to pour too much glue, as it will leave unsightly marks when it dries.
3. The sticky “mixture” should be mixed well and applied to the toy. It turns out to be a very beautiful craft!

And if you want to make such a costume for a small child, then you can go the simplest way. The body of the deer will be a brown overalls, but the horns can be made from gloves into which you need to put cotton wool. The gloves are attached to the hat using thread or a stapler.

How to make a New Year's deer with your own hands from polystyrene foam?

Styrofoam makes a very beautiful winter deer! Another advantage of this method of creating a toy is its simplicity.

Here's the plan to follow:

1. The foam used to create a deer must be clean, otherwise the toy will look ugly.
2. Before starting the craft itself, you need to outline a rough work plan: the size of the craft, its thickness, and so on. Then you need to take several pieces of thin foam and draw a model of the future toy on each of them.
3. After this, the model is cut out with a knife and the two parts are glued together.
4. To make the toy beautiful, it must be decorated with glitter and cotton wool.
5. Using red knitting yarn, you can make a scarf and hat for a deer.

Also, as an alternative, you can mold a deer from plasticine, crush the foam and sprinkle it on the animal. It is necessary to use white plasticine, because for the New Year you need to make winter deer. This will make the toy even more beautiful! If you make a small craft, you can put it on a stick right in the Olivier dish. This will give the holiday table an atmosphere of creativity.

How to make a deer from cotton wool?

1. First you need to decide on the size of the future toy. For those who have never done such crafts before, it is better to start with the simplest method. So, you need to make a “skeleton” of the future toy. It is made from wire.
2. After this, you need to deal with the main raw material for the craft - cotton wool. It should be torn into small pieces and crumpled into round balls. Each ball of cotton wool should be attached to the wire using tape. It should be cut into small strips so that it does not catch the eye.
3. For the horns you need to make separate small balls. This way the craft will look beautiful and neat. To make the toy colorful, several cotton balls can be painted red and attached to the deer’s antlers, alternating with white balls.

Origami: deer (video)

People say that the New Year is a magical holiday of fulfillment of the most cherished desires. So why not give it the magic that you can create with your own hands? A handmade New Year's deer is a wonderful way to prove your love to your family, so it must become one of the main attributes of this celebration.

New Year's deer are the same symbol of the New Year and Christmas as the New Year tree and Santa Claus. True, Reindeer is a Western variant, but this is not important when it comes to holidays and fun.

You can create such a cute symbol of the New Year with your own hands together with the kids. And at the same time, develop their creativity, imagination and create a festive atmosphere.

These animals can be made in many ways. For example, make horns for your baby with him. You will need a regular headband, wire and a piece of brown felt.

You need to cut out parts for future horns from felt, then lay wire in them, stitch the parts and attach them to the rim. Ready!

Here is an interesting option related to appliqué and drawing. Using your palms in paint, you need to leave imprints of deer antlers on the paper, and then stick funny deer faces on them.

Or you can cut out the outlined palm from paper.

Or even make a deer from a child's footprint!

Here's another interesting waste material - ordinary wine corks and fluffy wire (the kind sold in craft stores). The eyes are made of beads.

If you do not find such wire, you can use a piece of sisal to make horns. (And here see how to do it.)

The coolest material for making New Year's toys is felt. You can sew not only Christmas deer, but also New Year's deer. Draw a deer on felt with a ballpoint pen. Cut out two parts, sew them by hand or on a sewing machine. Don't forget to sew on a string so you can hang the items on the Christmas tree.

Even the smallest children can handle this option. Eyes and a nose are glued onto plastic coffee cups, and fluffy wire instead of horns.

Regular flower pots have nothing to be bored in winter! Glue the eyes and fluffy nose, make horns from colored cardboard. And the pots themselves can be filled with candies!

The latest craft is made from ribbons. It's super easy to make and turns out super cute!

Delight your kids with crafts in the form of New Year's deer, because time spent with a child is priceless! Especially during the winter holidays!