What comes first: wallpaper or linoleum. Are you planning to lay linoleum - what do you need to know? What does wallpaper or linoleum do first?

When carrying out repairs, we often think about how to plan the order of the work. Failure to follow the correct process can increase completion times and costs. Therefore, it is important to answer the following questions: what work is done first, where should you start - with wallpaper or linoleum?

Two repair options

REFERENCE. Most people are inclined to think that you need to start with the wallpaper and only then proceed to the floor.

The reason for this decision lies in the need for the entire area of ​​the room when pasting.

There are two styling techniques. To understand which is more convenient for you, we will describe both methods.

Method No. 1

Carrying out work with a prepared floor base. For implementation it is necessary first of all make the coating clean and smooth. Fences must be leveled and plastered. If everything is ready, then you should proceed to the following types of work.

• Wallpapering.
• Then proceed to install the linoleum.
• Weld the seams at the intersections of the flooring elements (if a solid covering was not used).
• Secure the baseboard.

Method number 2

If rough work has not been carried out (the surfaces of the floor and walls are not level), then this method is for you.

The sequence of work will be as follows:

• Using finishing materials we level the walls.
• We prime the floors and walls.
• We prepare the floor for installation of linoleum (pour the concrete mixture, install plywood, etc.).
• We cut the flooring material into pieces.
• We are laying wall decoration.
• We strengthen the linoleum with glue.
• We install the baseboard and weld the seams.

Let's start with the walls: pros and cons

The problem with any wallpaper is excess debris from ongoing repairs.. This is due to pruning rolls (around ornaments, door frames, etc.) moistened with glue. It dries quickly and pieces of wallpaper become difficult to remove from the surface. You have to soak the material with water for a long time. Therefore, if you skip ahead the work process with walls, you will be able to avoid problems with the new flooring.

Wallpaper glue itself can ruin the floor surface. Even careful handling does not exclude the possibility of glue particles getting onto the floor.

IMPORTANT! If you hesitate a little and do not wipe the glue with a damp cloth, then difficult-to-remove stripes will remain that spoil the entire appearance.

And the last problem is the legs of the stepladder, which can scrape the surface and ruin the floors. If scratches from stepladders remain on the concrete, then one stroke of putty is enough to remove the defect.

The only disadvantage that should be highlighted is the risk of damage to the canvas when rolling out linoleum rolls that exceed the width of the room. The edges of linoleum can damage the wallpaper and it is not possible to eliminate such a defect.

First floors, then walls: pros and cons

To lay linoleum, you need to trim the boards using a jigsaw. This type of work forms a large amount of wood debris, which settles on the surface of paper-based wallpaper. If they are not yet on the walls, then nothing will harm the quality of the wallpaper.

ATTENTION! On finished laminate or linoleum, you can work with rolls without any problems, lubricate them before gluing, without the risk of getting dirty with construction dust.

This way it is much more convenient to work than on concrete or cling film, which is usually placed before wallpapering.

Which option to choose

What you do in the end is up to you. If you are sure that gluing wallpaper on a wall is a simple procedure for you, then leave it for the last stage. Tackle the floors first.

Being careful and carrying out preparatory work is the key to successful repairs. For example, to prevent a stepladder from damaging the floors, cover the surface with plastic film (preferably several layers). This will also solve the problem of glue spillage.

IMPORTANT! Before you start laying linoleum, it is recommended to trim it and lay it over the area of ​​the room before gluing the wallpaper.

After measurements, simply roll the material into a roll, so you do not risk anything. True, possible discrepancies during subsequent laying of the material will have to be covered with decorative items.

The choice of sequence of actions depends entirely on the experience and skills of the specialist. None of the methods have obvious advantages or disadvantages that indicate a clear choice in favor of one method or another.

Pasting wallpaper and laying flooring (linoleum, laminate ceramic tiles) are one of the final stages of any cosmetic renovation in a residential area. Therefore, sometimes the question arises about the sequence of production of these finishing works. What to do first - glue the wallpaper before laying the floor, or do it after you have prepared a flat, clean surface for rolling out and cutting the wallpaper.

There is no clear answer to this dilemma. It all depends on the professional skills of the finishers and the type of flooring. Only one question can be answered unequivocally: you must first glue the wallpaper if you will be laying carpet on the floor.

Gluing wallpaper before laying flooring - advantages

Pasting any type of wallpaper involves quite a lot of construction waste. First of all, these are scraps and thin strips formed when cutting rolls, soaked in glue, after trimming along the floor surface, around window and door openings, sockets, ventilation holes, heating pipes. These strips and pieces, when they get on the floor, not only leave traces of glue, but also dry very quickly and stick tightly to any type of floor covering - laminate, linoleum, floor boards, and to remove them you need to soak them in water for a long time.

The second factor is the wallpaper glue itself. Even with the most careful application, drops cannot be ruled out on the floor covering. It will need to be wiped off immediately with a damp cloth or sponge. Otherwise, difficult to wash off stripes remain on the floor covering, clearly visible when the lighting angle changes.

The third problem is the likelihood of damage to the floor covering (linoleum, laminate) by the legs of a stepladder or scaffolding, from which it is convenient to glue wallpaper. On a concrete screed, marks from a stepladder or scaffolding can be eliminated with one stroke of a putty knife and putty and will not in any way spoil the appearance of the floor covering.

The only drawback of this sequence is the risk of damage to foamed or embossed wallpaper when rolling out linoleum rolls that exceed the width of the room.

The hard edges of the linoleum when you lay it can damage the thin, loose polymer coating of the wallpaper that was pasted before and leave irreparable defects on the walls.

From the listed risks, we can conclude that if you value laminate or linoleum more highly than wallpaper on the walls, it is better to glue the wallpaper first and then lay the flooring.

Advantages of laying flooring over wallpapering

Laying laminate flooring requires cutting the boards. A jigsaw is usually used for this. As a result, a large amount of fine wood dust is formed, which can settle on the uneven surface of profiled (embossed) wallpaper if it is already pasted before finishing the floor.

On clean linoleum (laminate), you can safely roll out rolls of wallpaper and lubricate the sheets before gluing them to the wall, without fear of staining them with cement from the screed.

It is more comfortable to work on a clean linoleum or laminate floor than on a concrete screed or get confused in the constantly clumping plastic film that can be laid on the screed before gluing the wallpaper.

Way out

When choosing between a sequence of actions, proceed from your own experience in finishing work.

If you are more confident that gluing wallpaper is an easier operation for you, leave it for the final stage of finishing. First, it is better to lay laminate or linoleum.

By being careful and careful when moving a stepladder across the laminate flooring or by covering it with plastic film beforehand, you will minimize the damage that can be caused by spilled glue or a hard stepladder leg when you are gluing the wallpaper.

This especially applies to laying rolled linoleum. It is better to first lay the linoleum and cut it in place before gluing the wallpaper, and then roll it back into a roll if you do not want to take risks. But this method does not guarantee that when you subsequently roll out the linoleum roll, you will be able to achieve complete coincidence of the cut corners and holes. These discrepancies will have to be covered with decorative skirting boards or patches.

This problem does not arise if laminate or ceramic tiles are laid first. All work on sawing and drilling can be done in an adjacent room or on the balcony, completely avoiding the formation of construction dust in the room with new wallpaper.

Instead of a conclusion

From the analyzed advantages and disadvantages of each method of producing the final stage of finishing work, a conclusion follows. The choice of the sequence of what to do first, paste wallpaper or lay flooring, depends entirely on the skills of the master and habit. Neither method has any obvious advantages or obvious disadvantages.

Laying linoleum does not require professional skills or special knowledge; you can do it yourself.

In this article we will give basic tips that will help you properly prepare for self-installation: how to calculate the required amount of material, how to prepare the room and base, what tools to purchase.

Calculation of linoleum

It is necessary to measure the entire floor area and draw up a floor plan. The walls may be uneven, so you should take measurements at different points, while taking into account niches and doorways, so as not to patch in pieces later. Put all dimensions on the diagram. Calculate the length of the coating based on the width of the canvas. If possible, it is better to lay linoleum in one sheet without joints. The store sells rolls 1.5-4 m wide.

Buy linoleum with a margin, taking into account the overlap of 5-10 cm on the walls. If you cannot avoid joints, try to calculate the material in such a way that there are minimal connections between the panels.

Preparing the base for installation

Linoleum should be laid on a well-leveled base. There should be no dust or crumbs on the floor. This is especially critical for thin material - any pebble will visually manifest itself after installation, and during use, abrasion or cracks may appear in this place.

The concrete base must be leveled with a special compound and dried properly. Lay linoleum only after complete drying.

Check the wooden floor for the presence of fasteners (screws and nails). If any are found, remove them or drown them in boards. To level the floor, lay sheets of plywood or OSB, sand the joints and putty. If linoleum is laid directly on a wooden floor, the coating will repeat the unevenness of the boards and will look unsightly.

When should you lay linoleum: after wallpapering or before?

If you lay the covering before wallpapering, it can be damaged later by stepladder legs or tools. Special care is required here. If you vouch for it, then it is still better to install it before pasting, since rolling out and cutting the roll in a room with freshly pasted walls is very problematic - there is a risk of damaging or staining the wallpaper when adjusting and trimming the linoleum.

Tools required for installation

• Metal ruler
• Roulette
• Pencil
• Double sided tape
• Knife with replaceable blades
• Adhesive for welding joints
• Glue or mastic, notched trowel (if you are going to glue the linoleum to the base)

Preparing the premises

• The room temperature must be at least 18°C.
• Clear the room of unnecessary items and remove all furniture.
• Remove baseboards.
• Remove old flooring.
• Eliminate base defects.
• Lay sheets of plywood or OSB on the wooden floor.
• Level and prime the concrete base.
• Plaster the joints between the floor and walls. If there are large cracks there, foam them first. After the foam has dried, cut off the remains and putty.

The floor is ready, you can start

We bought linoleum, too, and all the bells and whistles that come with it, but the question arose: WHAT SHOULD COME FIRST? WALLPAPER OR LINOLEUM??? WHAT TO DO???

Answers

Wallpaper if there is a room with skirting boards
if not then linoleum

First, the walls :) which means wallpaper with bells and whistles :) patience to you in this difficult matter :)

You do this: roll out the linoleum and trim it, then roll it up again, glue the wallpaper and unroll the linoleum again. And you won’t have to wash off the glue and you won’t tear the wallpaper when unrolling a large piece of linoleum.

Lay down the linoleum first, then the wallpaper, if it’s the other way around, you’ll tear up all the wallpaper anyway... Damn - wash off the glue, this is of course a super task that requires remarkable efforts... :)

Repairs are always done from top to bottom. This means wallpaper, then linoleum.

At first make the floor. Then wallpaper. You cover the floor, put a film on top of the linoleum bed (so as not to get it dirty), then glue the wallpaper, and at the end you fill (or glue) the baseboards.
I have been doing repairs for many years.

Lay down linoleum, then roll out the wallpaper on clean linoleum!

The wallpaper is glued last. When everything is already painted and laid.

First the walls

If wallpaper go for painting, then first glue the wallpaper and paint it once, then lay the linoleum, trim it, let it sit for 2 days, cut it again, glue the linoleum (it’s up to you to glue it or not), nail the baseboards and paint the wallpaper a second time.

Tag: