Have a question about how to install a map in Minecraft? Here for you! How to install Minecraft PE maps? Minecraft games how to install a map
If it seems to you that there are not enough cards in the game, and you want to try your hand at new terrain, but do not know how to do it, then this article will be very interesting to you, since it will discuss how to install cards in Minecraft PE. This process will not be as difficult as installing Minecraft mods, but it also has its own small nuances:
Installation instructions for maps for Minecraft PE
- The first thing you need to do is from the appropriate section of our site;
- Download the map to your device along the way
sdcard / games / com.mojang / minecraftworlds ; - The entire map is installed, and you can enjoy an exciting gameplay in a new area.
As you can see, this process is very simple and does not even require the installation of additional applications and special programs.
Installing maps in Minecraft with the .MCWORLD file extension
Installation:1. Download a card with the .MCWORLD extension
2. Then find it and run it, thereby importing it into the game in automatic mode
3. Open the game and go to the map selection
4. Your card will be on the list
How to download a map for Minecraft PE?
- Go to the website site where are collected by category
- Choose your favorite map you want to download
- At the end of the article there is a link to download the map
Instructions
If you feel that Minecraft in its classic incarnation is starting to bore you a little, try playing it on maps other than the standard one. You will find that the choice is unusually wide. You can test your "minecraft" skills on a distant planet or on an abandoned intergalactic station, on flying islands (where there is a high risk of falling into an abyss, losing all your inventory), on a land teeming with pirate treasures and numerous dangers, on a medieval estate, on a huge an airship or a ship, in a tangled maze (full of hostile mobs), in twin towers, etc. The choice in this case is solely yours.
Find on any of the sites that offer software for Minecraft (including numerous add-ons to it) a map that suits your needs and ideas about the ideal gameplay. Just refer only to those sources that are trustworthy. Taking a card from a dubious portal, you may face the fact that it is at least inoperative, and at most, the file with it is infected with a virus. Therefore, carefully check the resource from which you plan to download this kind of material (for example, ask about it from those gamers whose opinion you trust). Only after that, take the risk of taking an archive with a map from there.
In the event that you are not satisfied with the ready-made cards, create your own. Use various mods for this (Too Many Items, Single Player Commands, Zombies Mod Pack, etc.). Come up with an interesting storyline, set the rules (make them visually, on), write in the original name, mark the spawn point of the players and make a starter kit for each of them. Be sure to check if your card is functioning normally. Now get down to installing it. This is done in the same way - regardless of whether it was developed by you personally or downloaded from some resource in a finished form.
If the card is presented in the form of an archive, first unpack it using a special program (WinRAR, 7zip, etc.) - otherwise you will not be able to install it normally. Now find the saves folder in your .minecraft. To search for the game directory, go to the C drive in the Users folder (for 7, 8 or Vista versions of Windows) or Documents and Settings (in XP). Find your username in it, open Application Data there - and you will see the directory you are looking for. Transfer the folder with the map to saves. Make sure that its name does not coincide with those already there. Now start the game, click on Single Player from the menu and then select the name of the card you just installed.
If you are tired of surviving, you can try to download and go through one of the maps for MCPE! But how do you install it on Android? Let's figure it out!
Unlike installing mods, maps do not take much time, or rather almost do not require it at all. Especially if the card is in the " McWorld", since to install it, you just need to download the map from the section on our website -" "
Then just click on the downloaded file, after which it will be automatically imported into the game and all you need to do is go to Minecraft Pocket Edition.
How to install a map on Minecraft PE in ZIP format?
- You need to download any file manager with support for unpacking the archive, as an option you can use "ES Explorer".
- Go to the downloads folder and find the downloaded archive, extract the folder with the map for MCPE itself.
- Extract the map folder to the following directory: /storage/emulated/0/games/com.mojang/minecraftWorlds/ ... Unpacking the card can take from a few seconds to several minutes. Depends on the size of the map. \
Important: Do not forget to make sure that you have installed
The question icon is help.
When you select the top button, the user will be transferred to the file hosting service, where this very card is stored.
In this picture, the file is in .rar format. This is an archive format, opened by archivers (see figure).
When you open the .rar file, this will pop up (or another, depending on the archiver, the window will be described in the article using WinRar as an example).
Then you need to right-click on the shortcut and then left-click on "File Location".
There should be a folder in the game folder "Saves".
We must go there. If there is no such folder in the game folder, you need to create it by clicking the right mouse button.
The folder name must be “saves” (no brackets) and nothing else.
In the future, all downloaded and created maps will need to be thrown there.
Having created the folder, you need to return to the archiver (Figure 10) and click on the "Extract" button.
After selecting the path, extraction will begin.
It will last no more than 10 seconds.
After finishing the archiver can be closed.
That's all! You just need to start the game and the map will appear in single player mode.
How to make your own map for Minecraft?
It is very simple to make your invention, but so that the finished card does not get bored quickly, you need:
- Have a wide imagination. Then the card will be large and it will not come out in 3 minutes.
- Have time. It takes a long time to create a large map.
- Pay attention to absolutely every little thing, every pebble and every leaf. Then the map will have fewer "lags" - errors that prevent it from working well (for example, walking - walking along the road and suddenly fell through simply because the cube that the character stepped on was not a solid body).
- Good knowledge of English. Usually, when creating a map, the interface is in English.
First you need to choose the version of the game for which the map will be developed. Better to choose the game version 1.8 or higher.
After in the game, you need to go to the "Creativity" mode and there you need to find the "World Settings".
Translated, this is "Settings To World". There it is necessary DISABLE generation of buildings.
Then you need to choose a flat type of the world. Then you can start creating a map.
After choosing the world, you need to choose for which game mode the map will be created.
Survival or arcade?
It's up to you to choose.
Based on the selected mode, you need to think about how many and what items you need to create.
If it's an adventure, then you need to come up with a plot, but to survive you need to have more enemies and fewer (you still need a little, otherwise the character will die of exhaustion) food.
Map creation
It is believed that the WorldEdit program, which can be downloaded from this link, will greatly help players in creating a map.
DownloadThe first one can be added a lot of blue and white squares - sky and clouds.
Of course, you need to add the cubes of the path to the village and next to the path the brown cubes (wooden fence) along with the small houses.
And a couple more residents. An action must be applied to the villagers so that if the player approached, the "Talk" icon was displayed.
The villagers also need to add the text of the conversation about the kidnapped girl.
Not far from the village it will take a lot - a lot of green and dark green cubes - trees.
You will also need some white and black cubes - slugs and spiders. The more cubes, the larger the object.
If possible, you do not need to draw them - you just need to add them from the animals section (if, of course, there is one).
After that, you need to add a blue river, and then a brown mountain with a white top and some small gray details of the castle.
Then again the terrain (flat, for every taste).
It is not difficult to draw a lava moat (red and orange), as well as a suspension bridge.
The most difficult thing will be to draw a large castle and, even worse, a staircase and a room inside it.
In the picture, the bridge is not wooden, but made of stone (gray cubes) and leads directly across the lava lake directly to the entrance.
You can draw something like this, but the castle must be brick or stone.
After that, at the end, add an invisible (until the opening of the cell) portal.
Well, and, of course, enemies, a girl, a cage (should not break so that it cannot be broken during a battle with the boss), a room and a key.
So, when, finally (what a horror, I threw myself into it for so long!) The map is created, it will need to be saved as a regular game world.
This can be done by clicking on "Save" or "Save As New World / Map / Game / Level".
The map will be saved in the “saves” folder mentioned above.
The folder is located in the .minecraft folder of the game.
Now the card needs to be tested for operability and completely go through it yourself.
If there are imperfections, fix it in the same program. But it's not scary, you won't have to do it again.
You just need to open it from the “saves” folder. After finishing, save again and test again.
They will come in very handy later.
And now everything is almost ready! Now you just need to exit the game and go to the "saves" folder.
Having opened it, you need to create a new folder with the name of the map and copy the created map there.
After that, on the folder into which the map will be copied, you need to right-click and select “Add“ folder name ”to archive”.
After clicking, the program (in this case WinRar) will begin to archive itself (i.e. pack into one file) the folder with the map.
Do you own your own server in Minecraft? But you are not able to build something worthwhile on your own, and your friends are tired of playing in the monotonous world of "Minecraft"? No problem! In such cases, there is only one way out - download and install the map you like on your server. Especially for you, many players are working on the creation of maps. You just have to find and download the one you need. Next, you need to transfer it to your server. And how to install a map in Minecraft, will be described in this article.
First, let's figure out what they are. In Minecraft, a map is a kind of system consisting of directories and files of various types, which carries information about the blocks and their location. Maps can be generated an unlimited number of times, but they have a limited size: for example, the tallest building should not exceed 256 blocks in height, and the entire map should not be more than 13 million blocks. But don't be upset, 13 million blocks is a lot. It will take a player several days to research a map of 2-3 million blocks, and what can we say about 13 million. Maps are multiplayer and single player. It is easy to guess that the main criterion for this division is the number of players.
Before you install a map in Minecraft, you need to decide on its choice. It's simple. Maps in Minecraft are a very good thing. There are "adventure" cards, there are cards for passing. If your main goal is to complete all challenges alone or with friends, maps in Minecraft are a very fun task. And there are cards that carry nothing but a beautiful design. Here you just have to admire the buildings. Hand-built cards are considered the most valuable, and they are often the most beautiful. They are created without various generators and are used to progress through the game.
Now let's move on to the question: "How to install a map in Minecraft?" The answer to this question is very simple. By the way, I must say right away that there are two types of map installation: in single-user and multi-user modes.
Option 1
The multiplayer mode suggests that for it you need to find a map that must support multiplayer (therefore, the choice is significantly narrowed). Then you need to unzip the archive (most often maps are downloaded as Winrar), then you need to copy all the files from the archive to the / minecraft / world / folder. If you need to replace files, do not be afraid, replace them calmly. Then start your server and wait for the map to fully load. Loading times vary by map size, so be prepared for long wait times.
Option 2
In single-player mode, you also need to download a map, but absolutely any map comparable to your version of the game will do. Then you need to find the "saves" folder. On Windows 7, this folder can be found as follows: write% appdata% in the search bar, then find the .minecrsft / saves folder, and then transfer all the files from the archive to the found folder. On Windows XP, this folder can be found by typing "Run" in the search box, and in the window that opens, write: "% appdata%", then - you know.
This concludes the article, I hope I helped you with a solution to the question of how to install a map in Minecraft.
Loading...