Purification of tap water. Methods for purifying water at home Purifying water from chlorine at home

Every person needs water to live, we drink it, use it to prepare food for ourselves, and wash our bodies with it. We are accustomed to taking it for granted that when we open the tap, we get water from the tap. But this water is far from ideal quality, so it requires additional purification. But how can you do this at home without expensive industrial multi-level filters?

What's wrong with tap water?

Water - this is a source of not only liquid, but also mineral salts for the body; a person cannot do without water, it must always be in our homes. But tap water is intended for domestic needs - washing dishes, bathing and laundry. It is better not to use it for drinking; it contains too many chloride compounds. They are added to water to disinfect it from viruses and microbes that can be dangerous to human health.

However, chlorine itself is unsafe: it negatively affects body proteins, irritates the mucous membranes of the digestive system, disrupts the intestinal microflora and causes general allergization of the body. In addition, chlorine in water also forms by-products that are potentially dangerous to the body and require prior removal from it.

In addition, the quality tap water It also depends on its hardness - the amount of calcium and magnesium salts, as well as admixtures of iron and other minerals. If there are a lot of salts, this can negatively affect the kidneys; if there are few minerals, the body will suffer from a lack of them, the skeleton will become more fragile, weakness will appear, hair loss and dry skin.

The taste of food cooked with tap water and the taste of food cooked with purified water are very different. Fragments of rust, dirt, scale and other impurities can get into the soup or second dish from tap water. A coffee or tea in general will be frankly spoiled, despite the most expensive varieties of the raw materials themselves.

By the way, it has been proven that even strong chlorination does not kill Giardia cysts, and you can easily catch them when drinking raw water. Therefore, do not neglect at least the simplest methods of water purification, then your health will be significantly supported.

Water purification methods

We present to your attention the most simple ways water purification.

Boiling water

This method, of course, will remove germs and viruses from it, but not chlorine compounds. When the temperature rises, chlorine reacts with salt impurities in water and converts them into chlorine compounds, which are unsafe for health. In addition, boiling deposits some of the salts on the walls of the dishes; look into your kettle and see how many of them are there.

Water settling

This is one of the simple and cost-effective ways to purify water from chlorine. Chlorine is a volatile compound; when water sits for 6-8 hours, all the chlorine dissolved in it will evaporate. Stir the water several times - this will help the chlorine separate more actively.

The disadvantage of this method is that heavy metal salts are not removed during settling.

Freezing water

One of the most effective ways One way to purify water at home without the use of special devices is to freeze it.

How to purify tap water?

Water is a special compound, a solution of ions, it contains an admixture of so-called “heavy” deuterium water. These are special heavy hydrogen ions from water that negatively affect the health of the elderly and children. Such water freezes before the total mass, remove the needle mesh from the deuterium water, and freeze the rest in an open plastic container (it is better not to freeze glass containers: when water freezes, it expands and the glass may burst).

After freezing, the ice will have a layered appearance - at the edges there will be cloudy ice with impurities and harmful compounds, in the center there will be pure water. This cloudy ice defrosts faster, is drained, and the core is used for drinking and cooking. The only drawback of melt water is that it contains few useful salts; to drink it, it is better to add 100 g of mineral water to a liter of such water.

Water purification methods (continued)

Coal cleaning

This method of water purification is known to avid travelers and military personnel. To clean a glass of water, you need 1 tablet of regular pharmaceutical charcoal - it is pounded, wrapped in gauze and filled with water, after 15 minutes the water is filtered through a fine sieve. This water tastes good and has no odor. However, coal does not protect against viruses and microbes - in conditions wildlife Such water still needs to be boiled additionally.

Silver cleaning

Silver is believed to neutralize microbes and some metal salts, although silver's cleaning power has been greatly exaggerated. It is recommended to leave a silver item - a spoon or a special pendant - in a container with water overnight. Water sedimentation and disinfection work simultaneously.

Water purification with magnets

Another one of traditional methods, which has questionable effectiveness. It is recommended to surround a container with water with magnets and leave the water for several hours. Option: wrap magnets around the pipe that supplies water to the tap. This method does not protect against chlorine and microbes, but theoretically it can purify water from iron and its salts due to magnetization.

Tap water is considered safe, but many still prefer to “play it safe” by installing additional water filters or boiling it before drinking.

You can only find out how safe the liquid you drink is in a laboratory.

However, some signs of poor quality water can be determined by eye and thanks to the olfactory and taste receptors.

What's wrong with tap water?

Drinking tap water is undesirable and sometimes even dangerous. It contains too many chloride compounds. According to standards, chlorine should be up to 0.5 milligrams per liter of water. This amount is considered safe for humans and at the same time effective in the fight against bacteria and microbes.

Since 1904, humanity has been chlorinating water to protect against infections. Unfortunately, this is not an ideal solution - over 50 years of living with tap water, a person drinks 16 kilograms of chlorides, 2 kilograms of nitrates and 2 tablespoons of aluminum.

There is often rust in such water - water pipes in most cases are old and metal, iron oxide dissolves in water and is present in the form of small particles.
The direct result of drinking such water is kidney stones.

Tap water may be mixed with sewerage. According to the Russian Association of Water Supply and Sanitation, wear plumbing systems in Russia it is approximately 58%. Sewer and water pipes laid side by side, in the same boxes, and they can rot so much that when you open the tap, you will see brown water flowing.
You should absolutely not drink it.

In addition, the quality of tap water depends on its hardness - the amount of calcium and magnesium salts, as well as impurities of iron and other minerals.

You should not drink tap water if:

The water is cloudy;
- if the shade is greenish, rusty, yellowish or any other;
- if the filter with a replaceable cassette has turned yellow (this may be due to worn-out pipes and, as a result, rust and iron getting into the water);
- water has a specific smell;
- after the water has settled, you see abundant sediment;
- the water has an unpleasant taste.

How to purify water at home?

I think it is no longer a secret to anyone that the water that flows from our tap does not have the quality and purity that our body needs. If you have a filter, all you have to do is change the cartridges regularly to be sure that the water you drink is extremely healthy.

But, just so you know, we can purify water at home without spending a lot of money on filters and cartridges, but using fairly simple methods.

Quality drinking water can be improved at home in several ways:

❧ Advocacy.
You need to pour tap water into a glass container and let it sit for six to seven hours. During this time, volatile chlorine, along with other volatile impurities, will evaporate (it’s good if you periodically stir the water - this will help the “volatilization” processes occur more intensely).

However, heavy metal salts will not go away from settled water; at best, they will settle to the bottom. Therefore, when you use this water, pour out 2/3 of its contents without shaking, so that the sediment at the bottom does not mix with more or less purified water.

❧ Filtration.
Pass the water through any filter. This can be a filter jug with a replaceable cassette, a faucet attachment and a filter for the cold water riser.
There are many types of water filters on the market, and prices vary widely.
When filtering water at home with capacitive filters, the main thing is to change the filter on time. Be sure to pay attention to the characteristics of the filter: how many liters of water it can purify, and control this amount.

If you do not change the filter in time, then the harmful components accumulated in it will go into the water being purified, that is, the water will not only not be purified, but the harmful components accumulated by the filter will also be added to it.

It is best to filter water at home with multi-level filters, but they also have serious prices.
Using such a filter, water is first purified from mechanical impurities, sediments, chlorine, colloidal solutions and iron oxides. And then, thanks to the reverse osmosis membrane of the filter, bacteria and viruses are removed from the water.

Multi-level filter purifies water by 99%. This figure is much higher than that of chlorinated water, not to mention the disadvantages of chlorination given above.
Water purified by such a filter is close in composition to spring water.

❧ Boiling .
To boil water, use a regular kettle, not an electric one: the water will boil more slowly, but there will be much less scale. For cleansing, simple boiling is generally sufficient.
You need to boil water for at least 10-15 minutes. Only in this case a significant part of the microorganisms dies.

However, this method has its drawbacks. Our water often contains salts of heavy metals. When boiling, water evaporates and the concentration of salts in it increases. They are deposited on the walls of the kettle in the form of scale and lime and then enter the human body.

❧ Freezing.
This method will not purify large volumes of water, but it will be really clean. Pour tap water into plastic bottles (not glass bottles or jars!)
Fill it with water, not reaching 1-2 cm to the edge, in order to leave free volume, since water increases its volume when it freezes. Remember glass bottles of water that burst in the cold? And put the bottle in the freezer.
When about half of the water in the bottle freezes, drain the rest, remove the bottle with ice from the freezer and let the ice melt naturally.

Freezing is used mainly to remove excess salts from water. This method is based on the principle that pure water freezes at a higher temperature faster than water containing salts.
When pure water freezes first, what remains between the ice crystals is a so-called brine, that is, a mixture of water and salts. Accordingly, the “brine” is drained without allowing it to freeze, and clean ice is melted, obtaining purified water.
True, if the freezing temperature was too low, it may happen that not only pure water, but also the “brine” freezes.

Make sure that the ice in the bottle is transparent. Cloudy ice should not be used as it may contain harmful substances.

❧ About silver cleaning
Silver ions, due to their bactericidal effect, perfectly purify water. You can use any silver item, preferably 999 fine: put it in a container of water and leave it overnight or for 8-10 hours.

Even an ordinary silver spoon dipped into a reservoir of water can improve its properties.

However, silver ions accumulate, as a result of which an excess of silver may occur in the body, and this will negatively affect metabolism.
So try to consume not only “silver” water.

❧ Cleansing with activated carbon.
Activated carbon is used in most filters used for water purification. After passing through it, the taste and smell of water improve, since it adsorbs most of the harmful impurities contained in the water.

You can make something like a filter yourself: just place the tablets activated carbon(calculating 1 tablet per 1 liter of water) into a bag made of cloth or gauze, place it in a container and pour tap water into it.
It is enough to keep the coal in water for 12 hours for the water to become purified.
This carbon filter needs to be changed 1-2 times a week.

❧ Cleansing with iodine.
Along with activated carbon, many purification systems also contain iodine. It has a detrimental effect on pathogens found in fresh water.

It works most effectively if the water is at room temperature or hot. If the collected tap water is clear, then 5 drops of iodine will need to be added per 1 liter; if it is cloudy, then 10 drops.
The water sits for half an hour, then you can drink it.

❧ Silicon purification.
Silicon, with its germicidal, antibacterial and anti-inflammatory properties, is the best natural filter for tap water. Silicon has a positive effect on the functioning of the gastrointestinal tract and metabolism, removes toxins, carcinogens and other substances harmful to health from our body.
You can purchase silicon in the pharmacy chain and in online stores/pharmacies.

The silicon is pre-washed well, placed in a container, and filled with water. Cover the jar with gauze and place it in the light, but away from direct sunlight, and leave for 2-3 days (at least a day).

Calculate the size of a silicon stone 3-10g per 1-5 liters of water. And do not drink the water to the bottom, carefully pour it into another vessel, leaving 3-5 centimeters of water with sediment.
Once a week it is necessary to clean the silicon crystals from plaque.

If there is no flint in the house, then water can be infused with Jerusalem artichoke. It has the highest percentage of silicon among vegetables - 8.1.
The second place in the amount of silicon is occupied by radishes. It contains slightly less silicon - 6.5%.

❧ Cleansing with shungite.
Lately Another stone called shungite is becoming popular for water purification. It is recommended to purchase large stones, then they will not need to be replaced with new ones, although, of course, once every six months they need to be thoroughly cleaned with a brush, a hard sponge or sandpaper.

Shungite water is prepared as follows: a 100 gram stone is placed in a liter of water (if you need more, then take more than one stone), the shungite water is infused for 3 days, no more, after which it is drained in the same way as when preparing silicon water.

Shungite water has contraindications: a tendency to cancer, blood clots, increased acidity and diseases in the acute stage.

In which countries is it possible and in which countries is it not possible to drink tap water?

There are many states that monitor water quality throughout the entire water cycle. For example, in Holland they do not use chlorine at all, and in Austria or Switzerland about 90 percent of drinking water is chlorine-free.

In Finland you can also drink water straight from the tap. At treatment plants, it is treated with ferrous sulfate, then exposed only to ozone for disinfection.

In France, water is also treated with ozone, passed through sand filters, then ozonated again and purified using granular activated carbon filters. Authorities provide tax incentives to those who do the best job of cleaning water.

In Italy you can drink water not only from the tap, but even from a fountain on the street. The quality of water in the country is checked regularly.

The highest standards apply to tap water in Germany. Modern treatment facilities have been installed throughout the country.

The non-profit organization Water.org annually publishes a list of countries where drinking tap water is not recommended. The top three most dangerous countries are Afghanistan, Ethiopia and Chad. Things are not going well in Ghana, Rwanda, Bangladesh, Cambodia, Laos, India and Haiti.
based on materials

Tap water contains whole line harmful chemical compounds and elements. Drinking such water worsens the taste of drinks and dishes, can worsen well-being and health, and also lead to various kinds diseases.

To disinfect tap water, it is chlorinated, which kills viruses and bacteria, but how side effect its consumption, the protein structures of the body are destroyed, the condition of the mucous membranes worsens and the intestinal microbiota suffers.

Bleach often contributes to the development of allergies. To eliminate the above problems, water must be rid of chlorine and other substances dissolved in it, for which there are a number of methods. And, of course, all problems with drinking water are solved by water delivery.

Water purification filters

The most common way to purify tap water is to purchase and use household filters. These can be stationary filters built into plumbing fixtures or filter jugs.

Water is poured into the filter jug; after settling in it, it can be drunk or used to purchase food. The filter must be changed at least once a month.

But there are cheaper and easier cleaning methods.

Boiling and settling

To clean, boil the water in a saucepan with the lid removed for 15 minutes. Boiling removes all harmful elements except bleach. But the bleach will evaporate if the water sits for 8 hours. In a container with settled water, heavy metal compounds accumulate in the lower third of the vessel to obtain clean water Carefully pour off 2/3 of the contents from above for further use.

Freezing water

Melt water contains significantly fewer harmful impurities than tap water. You should not freeze water in glass containers or plastic bottles; containers made from food-safe plastic are most suitable.

Wait until the water exposed to the frost or in the freezer freezes halfway, and drain the unfrozen part. Melt the ice and use it as drinking water.

Water purification with activated carbon

Wrap activated carbon tablets purchased at the pharmacy in gauze and place in a vessel with tap water at the rate of 1 tablet of carbon per 1 liter of water. It takes 8 hours to completely purify the water.

Water purification with silicon and silver

Buy silicon in the form of pebbles at the pharmacy, rinse them with warm water, place them in glass jar at the rate of 3 g of silicon per 1 liter of water. The jar should be placed in a shaded place, and after 3 days you should drink the water carefully drained from above; the lower layers of water should not be consumed.

Metallic silver disinfects water well, for which a silver coin or spoon should be placed in a vessel with water for 10-12 hours.

Other methods of water purification

There are other methods of water purification, but they are ineffective or are not suitable for everyone. The effectiveness of water purification with magnets has not been proven, and the strength of the influence of magnets different designs varies tenfold, and water purified by shungite is contraindicated for people with a number of diseases, acute and chronic.

We didn’t even mention purifying water with table salt, since drinking this water exceeds the recommended daily norm the use of table salt, and dry white wine (although this method was widely used in antiquity and the Middle Ages).

In camping conditions, you can purify water by adding 1-2 teaspoons of 6% tablespoon or apple cider vinegar, or 3 drops of pharmaceutical 5% alcohol tincture of iodine; complete cleaning with these methods requires 6 hours of time.

Rowan berries purify water even faster - place a bunch of rowan berries in a container for 3 hours. If rowan does not grow nearby, you can use bird cherry leaves, willow bark, juniper branches or onion peels. Such cleaning requires 12 hours of time.

The importance of clean drinking water for the human body has been proven a long time ago; since then, various filtration systems have become increasingly in demand. In addition, many people are interested in how to purify water using improvised means. This is especially true in case of insurance, if for some reason special devices do not inspire confidence or have become unusable. And such methods also allow you to significantly save money spent on all kinds of installations and cartridges.

All you have to do is choose suitable option liquid processing, or even several, and debug the system of its operation to cover the needs of the whole family.

Advantages and disadvantages of boiling, settling and freezing

First of all, it is necessary to evaluate the simplest and most accessible methods by which tap water is purified. These are physical options for exposure without the use of any filter, which have both obvious advantages, and serious disadvantages:

Boiling. When tap water is exposed to high temperatures, the liquid is sterilized. The main advantage of the approach is the fact that pathogenic microorganisms die. True, for cleansing to actually occur, the product must be boiled for at least 15 minutes with the lid open. Only then will the harmful components evaporate. It is worth considering that the water becomes “dead”, i.e. useless for the body, and nothing can be done about it. In addition, chlorine does not disappear anywhere, but only changes, turning into an even more dangerous compound for humans.

Advocacy. Another simple approach, the use of which is convenient only if there are no time restrictions. You need to pour the liquid into the bowl and leave for at least 8 hours. This type of water purification at home allows you to get rid of chlorine and a number of other volatile chemical compounds. True, heavy metals remain in the liquid, although they settle to the bottom. To get rid of them, the water should not be stirred or stirred, and after steeping it must be carefully poured into another container, leaving at least a quarter of the product at the bottom.

Freezing. Today, water purification by freezing is considered one of the most effective among primitive methods. physical techniques. You need to do the following: pour water into a saucepan or plastic container and put it in the freezer. Next comes the most difficult part - making sure that only half of the liquid freezes. Then we drain the liquid part (all the salts and harmful components remain in it), and melt the frozen part, and it becomes drinkable. It is recommended to drink this product immediately, because... it is considered healing. Therefore, you need to set a schedule for when it is best to freeze water.

Advice: Today, highly chlorinated water flows from the tap, which is considered safe for humans and supposedly can be used in everyday life. In fact, if you consume it in its “pure” form, you may experience digestive disorders, allergic reactions, penetration of worms into the body and, paradoxically, dehydration.

When choosing between boiling, settling and freezing, you need to take into account that you can control the quality of the product only in the latter case, because Water rich in mineral salts freezes very slowly. Therefore, the use of this approach in the absence of a high-quality filter is considered by experts to be the most logical solution.

Rules for using cleaning components

A number of chemical compounds can be used as a cleaning filter. Most often, water is purified at home with silicon, table salt, shungite, activated carbon and silver. Methods for preparing drinking liquid in these cases are as follows:

Use of table salt. For 2 liters of tap water, take a heaped tablespoon of salt and dissolve it. Let the product sit for 20 minutes, after which it can be consumed. With the help of such a unique filter, the liquid can be made free of heavy metal salts and pathogenic microorganisms. Unfortunately, such purification of tap water cannot be used too often, because...

Cleansing with pharmaceutical silicon. It is best to purchase the product at the pharmacy, so as not to encounter additional problems later. First, the ingredient must be thoroughly rinsed under lukewarm running water. Then we place it in a container with water at the rate of 3 g of stone per 1 liter of liquid. The container with silicon should be covered with gauze and put in a bright place, but away from direct sunlight. This filter will purify water in about 2-3 days. To get the maximum benefit from the product, you need to pour it into a new container, leaving at least 3 cm of sediment in the old one.

Another stone with which people are increasingly purifying water. To make tap liquid drinkable, you need to place a stone weighing 100 g in a liter of water and leave it for three days, then drain it, leaving a little product at the bottom. From time to time, such a natural filter needs to be cleaned with a hard sponge or replaced.

The natural product not only purifies water, but also eliminates unpleasant odors and absorbs harmful substances that have entered the liquid from the surface of the pipes. You just need to wrap a few tablets of the drug in gauze (1 piece per liter of liquid) and place in water for 8 hours.

Silver. Its properties are still used today, because the component is much more effective than carbolic acid and bleach. In order to start water purification, you need to place a silver coin or spoon in a container with tap liquid and leave for at least 10 hours.

At home, if you wish, you can make a real filter, but in terms of quality of work it still cannot surpass the described methods or industrial products.

Simple and safe folk remedies

Before you purify water at home using one of folk remedies, you need to take into account that their effectiveness will directly depend on the quality and environmental friendliness of the components used.

Rowan. Just put a bunch of berries in a container of water and wait a couple of hours. This natural filter purifies water no worse than activated carbon and silver.
Wine, vinegar. People knew how to purify water with wine thousands of years ago. You just need to take 300 ml of white wine (dry, young) per liter of water, mix and leave for at least 4 hours. In the absence of this ingredient, you can use vinegar. Only you need to take no more than a teaspoon for the same volume.

Experts warn that you should not try to quench your thirst with distilled water. Even though this product does not contain harmful components, there is no benefit from it. But regular consumption of such liquid accelerates the process of removing vitamins and minerals from tissues, which is dangerous for the body. Well, the easiest way is to buy at least a simple jug with a filter that will not take up much space, will not cause trouble, and will at the same time provide your family with clean drinking water.

Clean and high-quality drinking water is the key to health and well-being. Therefore, today almost every home has a water filter. But you don't have to buy this important item. The filter can be made with your own hands.

Water is the basis of all living things. A person can survive without water for no more than three days (while he can survive without food for two weeks). Water is the beginning of life. But it can also bring health problems. We are talking about untreated (unfiltered) water containing harmful chemical elements, compounds, impurities. The problem of clean drinking water is not new. And cleaning it is a serious household procedure.

How to purify drinking water at home

If we had the opportunity to examine a drop of water that we are about to drink, we would perhaps seriously think about the issue of filtering this product, which we cannot do without. In this case, household filters come to the rescue. There are a great many of them on sale now. But what if you don’t have a factory filter at hand? Do you need to purify water from harmful components? It turns out that it is quite possible to make an improvised and effective water filter using improvised means and certain materials. There are even simple traditional methods, which have been used for centuries, and which you may not have heard of at all.

Here is a list of the most common water purification filters or methods just for you.

1. Boiling

But all this can be achieved under the following conditions:

Boil the water for at least 15 minutes.
Do not cover the container in which the water is boiled.

This method has serious drawbacks:

Fresh water contains oxygen, hydrogen sulfide, calcium, magnesium, sodium, and potassium ions. The boiling process helps displace oxygen from the water. Ions react with each other under the influence elevated temperatures, as a result, salts of calcium and other elements are formed, which settle as scale on the inner walls of the boiling vessel. And what we end up with is not only “dead” water, but also one that is detrimental to health: for example, calcium salts over time can trigger the process of forming kidney stones and the development of diseases such as arthritis.
It is impossible to remove salts of iron, lead, mercury and other heavy metals from water by boiling.
Chlorine and its compounds, when heated, react with org. compounds form so-called trihalomethanes and dioxin - carcinogenic substances that in significant quantities can provoke the formation of malignant tumors in the body.

2. Water settling

The essence of the method is to settle the most ordinary tap water for 8 - 12 hours (exactly the same amount of time is required for the evaporation of chlorine and other volatile impurities).

To stimulate the evaporation of substances we do not need, it is advisable to stir the water from time to time.
However, heavy metal salts do not disappear from the settled water, calmly settling at the bottom, so there is no need to stir the water approximately an hour and a half before drinking.

To achieve the maximum purification of heavy metals in water, it is advisable to pour 2/3 of the volume of the resulting liquid into another container so that the harmful sediment remains at the bottom.

3. Freezing water

Freezing allows you not only to purify water from salts and other impurities, but also to saturate it with oxygen.
What are the benefits of melt water:

Removing cholesterol and salts from the body.
Strengthening the immune system.
Reducing the likelihood of allergies.
Rejuvenation.

How do you get melt water?

Do not fill a plastic container (but do not use a bottle made of plastic material) or a special plastic freezer bag with water completely: when frozen, water expands in volume. That is why it is not recommended to take glass containers.
Place the container of water in the freezer and leave it for exactly as long as 2/3 of it turns into a solid state.
Drain the water that remains unfrozen because it contains salts that stop the freezing process.
Defrost the existing ice - your melt water is ready.

It is advisable to consume up to 1.5 - 2 liters of melt water per day.

4. Water purification with activated carbon

Activated carbon is affordable and at the same time effective remedy. It successfully absorbs unnecessary impurities and unpleasant “odors”.

Classic household filters for water purification “work” on carbon filters.

How to make such a filter yourself?

Take:

Activated carbon (50 tablets).
Gauze (a bandage of sufficient width will do).
Vatu.
1 liter glass jar.
A 1.5 liter water bottle (plastic).

The filter manufacturing technology consists of three layers:

1. Cut off the bottom plastic bottle and insert it upside down into the jar.

2. Cut a piece of gauze (20x20 cm in size) in which to wrap the cotton wool (this is the first layer of our filter).

3. The second layer will consist of carefully crushed activated carbon tablets, which should be wrapped in cotton wool.

4. The third layer is prepared exactly like the first.

Make sure that the filter layers fit one another tightly enough.

A faster water purification method:

Place activated carbon in a ratio of 1 tablet per 1 liter of water into a gauze bag.
Tie the bag and place it in a bowl of water for 6 – 8 hours.

5. Silver cleaning

A long-known method of purifying water from microbes, viruses, bleach and other unnecessary substances. How can you purify water with silver? It is necessary to place any silver item in a bowl with water for approximately 8 – 10 hours.

Silver can disinfect drinking water. In addition, this metal has a healing effect on the immune system, has a beneficial effect on appearance skin and hair, starts the gastrointestinal tract.

Attention! Colloidal (liquid) silver cannot be used for these purposes. The latter, accumulating in the body, causes poisoning and provokes the development of a disease such as argyrosis, the symptoms of which are darkening of the skin to a darkish gray tone.

6. Silicon cleaning

To purify water with silicon, you need a stone weighing 5–10 g (you can buy one at a regular pharmacy).
Silicon water purification technology:

1. Rinse the silicon under running water.

2. Place it in a glass container with cold water(5 g of silicon is enough to purify 1 liter of water).

3. Cover the container with two layers of gauze.

4. Let the water stand for 3 days: make sure that the container with water does not get directly Sun rays However, there is no need to put water in a dark room.

5. After 3 days, pour the water into the prepared container, leaving 1/3 of the settled water with a sediment of traces of heavy metal salts at the bottom.

6. After each cleansing, the stone should be thoroughly rinsed and systematically brushed.
Water purified in this way works well on immune system and blood circulation, has a rejuvenating effect.

Attention! Silicon water has no contraindications.

7. Shungite cleaning

Another stone that is suitable for water purification is called shungite (you can also actually buy it at the pharmacy).

This mineral can absorb compounds of chlorine, phenol and acetone that are unusually harmful to humans, and removes pathogenic bacteria and microorganisms from water.

To purify 1 liter of water, you need to take 100 g of shungite.

Shungite water purification technology:

1. Rinse this stone thoroughly.

2. Place the shungite in a bowl of water at room temperature and leave for 3 days: the bowl of water should not be covered (it is enough to cover it with gauze).

3. At the first stage of purification, the water will acquire a black tone, but after a while it will become transparent again, and the resulting dust from mineral particles will settle to the bottom.

4. After 1 hour of the process, the water will be cleared of bacteria and nitrates, and after 3 days it will have healing properties(according to healers).

5. Drain the water, leaving about 3 cm of water at the bottom.

After use, shungite must be washed thoroughly, cleaned with a brush approximately once every 30 days, and replaced with a new stone twice a year.

Attention! Water purified with shungite has a number of contraindications:

Tendency to thrombus formation.
Promotes the emergence and development of oncology.
Increased acidity.
Diseases during exacerbation.

Before using the stone to purify water, it is advisable to consult your family doctor.

8. Folk remedies

Apple vinegar. Dilute 1 teaspoon in 1 liter of water, then leave the mixture for 2 - 3 hours in order to destroy microbes.
Vinegar can be replaced with 5% iodine, which should be added to water in a ratio of 3 drops of iodine per 1 liter of water. Leave for 2 hours.
Disadvantage of the method: water purified with vinegar or iodine does not have a pleasant smell and a specific taste, to put it mildly.

Do not forget that an excessive amount of iodine can lead to the following manifestations in the body:

Muscle weakness.
Persistent low-grade fever in the absence of signs of a specific disease.
Sweating.
Diarrhea.

Cleansing with rowan bunches. This water is aromatic and has a very pleasant taste. In terms of results, a number of experts equate the use of rowan with water purification with silver or coal.

To purify drinking water, all you need to do is place a thoroughly washed bunch of ripe rowan berries in a bowl of water. This plant is extremely rich in natural antibiotics, so within 3 hours the pathogenic bacteria present in the water will be destroyed.

Bunches of rowan can be replaced with onion peels, bird cherry leaves and juniper branches, but in this case, the water will have to infuse for up to 12 hours.

Remember! To strengthen the cleansing effect, it is advisable to always filter the water after infusion.
Folk remedies cannot completely purify water from chlorine compounds and microbes, so one should not attribute non-existent universal qualities to them.

Purifying water without a household filter

The drinking water we consume daily can be a healing agent, or it can be a source of acquired diseases. Therefore, you should not be careless with the water you drink. For example, tap water contains a lot of components harmful to humans. It is enough to imagine that mucus accumulates on the inner perimeter of water pipes from year to year, microorganisms multiply, which can easily penetrate our body. If the water pipes are old or made of metals that can corrode, then rust is added to the wide range of compounds and substances harmful to health.

Clean drinking water becomes a real treasure. Could people who lived 100 years ago imagine that drinking water would be sold for money? You may know that drinking water shortage is on the list global problems humanity. After all, despite all the achievements of science, people have not yet figured out what can replace water. published.

*Ekonet.ru articles are intended for informational and educational purposes only and do not replace professional medical advice, diagnosis or treatment. Always consult your physician with any questions you may have about a medical condition.