How to build the cheapest house yourself

How often do people think about building their own home, and dream about it. But despite the cost of building materials on the market and the price for work, dreams stop and never come true. This is not quite the correct position, since build the cheapest house yourself is quite real. If you exclude the work of the house construction team, then you will save 50% of the total cost of the built dwelling only on this.

How to build the cheapest house

If you decide to build on your own, then construction may not cost you much. Let's consider the stages of building a cheap house, we will analyze the necessary steps that will help us save a sufficient amount of money.
Let's start, the cost building a house consists of three components:

Material used for construction.
A job that can eat up most of your money as it is expensive.
A project that is indispensable when starting construction.

In addition to this, you can add the construction of the house. If you have plans to build the cheapest house yourself, then you need to take care of its constructive simplicity. This house should not have creative things that often make the structure several times more expensive.

Is it realistic to build a cheap house

In order to reduce the cost of construction, you need to study the building materials market for reasonable prices. You also need to find out the cost of finishing work. Ask why, if you can build the cheapest house yourself? The answer is simple, there are such works when building a house that only specialists can perform, and this must be taken into account. Start with a constructive solution. If you decide to build a house in several rooms, for example, five or six, then you will need a team of two people, since you cannot do without an assistant during construction. The cost of construction will not increase significantly from this, but things will go faster. The house can be built 6x10 m, it is very constructive, since with a house width of six meters, you do not need to build an additional load-bearing wall, and this significantly reduces the cost.

It is imperative to observe the ratio of useful and total area, your house should be comfortable and cozy for all family members.

The cheapest house, what influences it?

Since we have already decided on the walls to be erected, when erecting partitions, you can use drywall, this is the most inexpensive material. As for the roof, it is better to make it gable, since this option is simple to perform.

Building materials and work.
You need to consider such materials that can allow you to perform most of the construction and finishing work yourself. Companies that produce modern materials are trying to make them so that there are no big difficulties in installing them for a common man in the street.

But there is an option that will allow you to build the cheapest house yourself. Let's consider it in more detail.

How to build the cheapest house out of straw yourself?

We do not pay much attention to the fact that many building materials are under our feet. So we want to present you with a very old, but reliable technology for building a house, which will be not only cheap, but also environmentally friendly.
With modern building books, there is not even a mention of the possibility of building an earthen house. Although we have heard about adobe houses more than once. Building the cheapest house yourself from clay is easy. Perhaps this is one of the natural building methods.

Clay is a very ancient building material, in Russia and in Babylon, from clay that was not burned, they erected not only outbuildings, but also houses. As for the ancient technology, it consisted in the fact that wet clay was hammered into special molds that were dried in the sun.

If clay is mixed with straw, then a light, environmentally friendly reinforced material is obtained, which is distinguished by its strength and durability. Using this technology, you can get a kind of batteries that will accumulate heat during the day, being in the sun, and give it away at night.

Many now smiled skeptically, as they believe that it is unrealistic to build the cheapest house out of clay yourself, but in vain.

So let's get started.

First you need to build a foundation. It does not have to be reinforced, since we will be building a house that is light enough in weight. So this is where the savings begin.

The mixture is prepared, thus, one part of clay, two parts of sand and 1/6 part of straw are taken. You can mix the ingredients with your feet, for this, dig a hole in it, put a tarp, and fill in the ingredients, everything except the straw. When kneading, raise the edges of the tarp so that the mixture does not splash out. If you want to make your work a little easier, then use a concrete mixer, in which, along with sand and clay, you need to put several large enough stones, which, when kneading, will break the clay, homogeneously mixing it with the sand. We add the straw to the completely mixed mixture, and with our feet we distribute it according to the composition, from the mixer, of course, it must be poured into a container.

Building a cheap house

We fill the adjustable formwork on the frame racks and fill it with a composition of straw and clay. And as a result - heat-insulated walls in a frame house. After we have insulated all the walls around the perimeter, we fill in plywood or OSB, and the price of the last finishing material is much lower than that of plywood, and of good quality.
After that, you need to prepare mats, from the same composition that insulated the walls and fix them on the OSB with wire - this will be additional external insulation of the house. To save money, you can plaster with a lime-cement mixture. The layer should not be less than 30 cm.

As for the interior decoration, it is better to use clay plaster. For this we take one part of clay and three parts of sand.

Outside, we paint the house with lime paint, for this we take six liters of water, and extinguish the lime, we should get a lime whitewash mass, to which we add salt, and water in a volume of 10 liters. If this amount is not enough to obtain a working consistency, then it must be added. You get a white whitewash, but you can add color to it to get the desired shade.

Roofing of a cheap house

You have already seen that building the cheapest house yourself is quite simple.

Now let's move on to the roof:

Our roof will be non-combustible, cheap and easy to install, but it has a drawback - weight. Therefore, the roof slope must be at least 50 degrees. Such a roof will serve for thirty years. The rafters must be strong enough and massive, they must be firmly strengthened on the crate. The rafter poles should be seven centimeters thick.

In order for the rafters not to bend from the weight at the time of the roofing, they must be propped up, the props are removed after the roof is completely dry.
Straw for roofing should not contain unwanted impurities. The clay should be greasy. Moreover, it must be prepared in advance. The calculation of clay is carried out, thus, one cubic meter of clay is used for 35 squares of the roof. Why freeze clay? Clay that has been previously frozen will get wet very easily, which is important.

We knit sheaves of 20 cm in diameter from straw; the length of these sheaves should not exceed a meter. Next, the clay needs to be poured into a special hole and filled with water for six hours, you can withstand more, but not less. After that, the clay must be kneaded until sour cream is thick. Making a straw test. We lower the straw into the clay, and if it does not fall, then the clay is good, but if it falls, then you need to add clay and repeat the process.

We begin to mount the roof. We lay the first row of sheaves, pressing them tightly against the stubborn board. As soon as the sheaves are laid on the crate, they should be untied and leveled. Next, we lay the sheaves so that one overlaps the other, and the thickness of the roof is 15 cm. The sheaves are laid from the bottom to the ridge tightly and evenly. You need to cover the entire roof at once, otherwise there will be a skew. And this is done in two rows, first on one slope, then on the other.

As soon as four rows have been laid out, the future roof needs to be combed with a metal rake and filled with clay. After that, the solution must be compacted and smoothed. Do this with a shovel until a flat plane is obtained. This work is long and painstaking and therefore is carried out in stages. Before laying new rows of roofing, we recommend moistening the previous ones with water or clay mortar for better adhesion.

As soon as the slopes are ready, then they are leveled, if there are irregularities or depressions, then they need to be poured with clay, but it must be very thick. Why is this done? The answer is simple, if on your roof there are irregularities and grooves in which water can linger, then the roof will quickly become unusable.

Benefits of the cheapest house

A house built using this technology will have a number of advantages:
Antiseptic property,
Deodorant property,
Ecologicaly clean,
Protects against harmful radiation,
Isolates noise well.

These are not all the advantages of this building, it will be warm in winter and cool in summer. As you can see. You can build the cheapest house yourself in one season.
Let's dwell a little on the foundation, as it can take half of the construction budget, so we will try to make it as cheap as possible. Since our house is lightweight, there are no special requirements for the foundation. We dig a shallow trench, which we fill with construction waste, stones, scrap metal. After that, fill in all this with cement mortar, which will take a little and you can cook it yourself at home, which will naturally save your money.

As for the outside cladding of the house, fairly inexpensive siding can be used. If you want your roof to last longer, then cover it with tiles. So we, it turns out, build the cheapest house ourselves, with the involvement of voluntary force in the person of relatives and friends, then your house will cost half the price of the usual one, made of wood or aerated concrete.

In this case, with regard to windows and doors, you can put plastic, or wooden euro windows - this is at your discretion. Heating and water supply can be done as usual, as in a well-maintained house, but if you want to save money, it is better to pierce your well and put a pump there, and install a water heater in the house - the problem with water has been solved. The same can be done with heating, it can be made by a stove or from electricity, having carried out preliminary communications.

Having built the cheapest house, it will be a pleasure to live in this magnificent, albeit inexpensive home.

Share with your friends or save for yourself:

Loading...