Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to start construction.

The main part of the project is the architectural and design sections. If the customer is sure that there are intelligent specialists in engineering networks in the construction team, then the development of this part of the project in a specialized company can be abandoned. But you need to understand that the architect, designer and engineer are working on the project together and such moments as, for example, grooves and openings in the walls for laying pipes and wires, are provided by them in advance.

The engineering part of the project is divided into several parts

• Water supply and sewerage (VK)

1. water supply scheme
2. sewerage scheme
3. general view of the system.

Before proceeding with the design, it is necessary to decide what kind of communication will be - individual or connected to a centralized system.

Individual water supply gives complete independence from external conditions. But it must be remembered that you will need your own water sources, and drilling a well will cost a decent amount.

Connecting to a centralized system will require the development of the project in accordance with the technical specifications of the existing network and obtaining permission for the tie-in.

When connecting the sewage system to a centralized system, the procedure is the same as when connecting the water supply: filling out a request to the relevant services, developing a project, obtaining permission to insert into the system. If you decide to organize an individual sewer system, then from time to time you will have to invite a sewer service.

• Heating and ventilation (RH)

1. heating scheme: calculation of the required power of equipment, distribution schemes for heating mains, location of pipes and radiators
2. ventilation scheme: connection to power electrical equipment, ventilation communications and shafts, gangways and, if necessary, the location of stoves and fireplaces
3. boiler piping (if necessary)
4. general instructions and recommendations for the section.

If the ventilation system is always an individual design, then heating can be either individual (stove, air, water, electric), or connected to centralized networks.

• Power supply (ETR)

1. lighting layout
2. distribution of power networks
3. ASU scheme
4. grounding system
5. detailed description and characteristics of all elements of the system.

Electrical systems can be categorized as mandatory and optional. The obligatory ones include indoor and outdoor lighting, ventilation, air conditioning and electric heating systems. Additional systems include "Warm floor" or automated gate control.

IMPORTANT

• Each of the parts of the engineering section of the project should contain general and technical descriptions, specifications of materials and necessary equipment.
• Drawings of the elements of all systems and floor electrical wiring are carried out on a scale of 1: 100.

Package "Engineering networks"

Package "Engineering networks"

The project of engineering networks will allow you to competently lay communications and make the house truly comfortable and modern.

• Price RUB 3 800

Departure of the architect

Departure of the architect is carried out in individual settlements, the possibility of obtaining this service in your
region, check with the manager.
Initial departure involves: obtaining technical specifications and collecting information, communications, architectural data of buildings, clarification of the linear and height dimensions of the site, photographing.

Price: 500 rubles per hour *

* the time from the moment of leaving the office to the moment of returning back is taken into account

Departure of the architect

Departure of the architect

Get advice and recommendations from the architect on your site

• Price: 500 rub. in hour

Foundation Adaptation Package

When a typical house project is being developed, then some averaged soil parameters are taken as a basis. But, without having accurate data from geological expertise, it is difficult to take into account all the nuances in the design. Therefore, often the engineering and geological characteristics of a real site differ significantly from those originally laid down in the project. And this means that the foundation - the foundation of the whole house - will need to be finalized in order for it to be strong and reliable.

In order to completely eliminate all problems when laying the foundation, the specialists of our company have developed a package "Adaptation of the foundation". When implementing the package, not only technical characteristics are taken into account, but also the wishes of the customer.

This package includes:

• selection of the type of foundation
• calculation of technical parameters:

Depth of laying the bottom of the foundation
- load bearing capacity
- indicators of soil stress under the base of the foundation
- cross-sectional area of ​​working reinforcement, etc.

• detailed drawings of the zero cycle
• statement of costs of building materials.

The adaptation of the foundation gives a complete guarantee of its strength, and hence the reliability of the entire building. You are guaranteed to get rid of problems such as shrinkage and cracks during the operation of an already finished home. Moreover, often the adapted foundation turns out to be cheaper than the option originally laid down in the project. And this will help save materials and financial resources.

Price: from 10,000 rubles. - tape, plate

from 14,000 rubles - pile foundation

from 18,000 rubles - USHP (taking into account the warm floor in the slab)

Foundation Adaptation Package

Foundation Adaptation Package

Carefully prepared foundation project - a strong and reliable home

• Price: from 10,000 rubles.

Lightning protection package

Often, developers do not attach much importance to protecting their own homes from lightning: someone saves, someone thinks, someone hopes for "maybe". But 3-4 years after the construction of the house, many people remember about lightning protection. During a thunderstorm, a neighbor's roofing felts burned out all their household appliances, and they came across statistics on how many fires occur in a year due to lightning.

We propose to solve the issue immediately: to provide for protection already at the design stage of the house. It is worth thinking about this, if only for purely aesthetic reasons - it will not be necessary to hammer the walls of the house once again and pull the down conductor along the facade, disrupting the well-thought-out appearance of the building.

Home lightning protection is a system of devices located both outside the home and indoors. External lightning protection prevents lightning from entering the house, internal - protects the power grid from sudden voltage surges. And special devices protect electrical engineering from sudden changes in the electromagnetic field in the radius of a lightning strike.

The package "Lightning protection" includes

• layout diagram of the location of lightning rods that absorb direct lightning strikes
• sectional diagram of the down conductor that carries the current from the lightning rod to the ground
• scheme of the ground loop, which distributes lightning energy in the soil, ensuring complete safety
• averaged resistance calculations
• detailed list of required materials
• recommendations for the implementation of the project.

The Dom4M Lightning Protection package guarantees you the safety of your home even in the worst thunderstorm.

Lightning protection package

Lightning protection package

Lightning protection: think about safety in advance

• Price 3 100 rubles.

Making changes to the project

Often the question arises before the customer: choose a standard house project and save money, while losing on the originality of future housing, or order an individual project, but for a lot of money.

Our company offers a compromise option. You order a standard project, and we make changes to it, taking into account all your wishes as much as possible. Of course, this implies additional costs, but, in any case, such a project will cost much less than work for a specific order. And we will take care of making your house look original.

You can make the following changes to the house project:

move wall partitions. But only if they are not carriers. Such an operation will allow you to change the size and purpose of the rooms.

the transfer of window and door openings will allow you to change the illumination of rooms and organize convenient access to the rooms you need

changing the type of floors and walls will allow you to fully realize your own ideas about economical and rational housing

change the height of the ceilings. Although all our houses are designed with an optimal room height of 2.8 m, some customers believe that high ceilings are additional coziness and comfort.

converting the attic into a living space will give you the opportunity to expand your own living space

it is worth changing the angle of inclination of the roof and awnings taking into account the climatic conditions of a particular region

it is necessary to change the type of foundation, taking into account the engineering and geological parameters of the soil. It is also possible to add or modify a basement or basement.

you can add, remove, change a garage or a terrace, in accordance with your ideas about the functionality of housing

changes in the structural composition, building and finishing materials will allow you to economically manage your own financial resources

the project in a mirror image will organically fit the house into the surrounding landscape.

The changes made should not affect the safety of the home.

Too many changes usually do not improve the design. If you could not choose a suitable house in the catalogs, then it may be worth ordering an individual project housing from an architect.

Price: from 2000 rubles.

Making changes to the project

Making changes to the project

A house built according to a standard design may look original

• Price: from 2,000 rubles.

Underfloor heating package

The "Warm floor" technology has become an important component in maintaining the optimal temperature regime and organizing an overall comfortable environment in the house. Such equipment can effectively complement any heating system. By the way, sometimes "Warm floor" can act as the main way of heating the house. Due to the use of such equipment, the floor temperature is 2-3 o higher than the temperature at the head level of an adult.

And the whole room warms up evenly at a height of up to 1.5 meters. As the saying goes: keep your head cold and your feet warm.

If your family has a small child, this will be the solution to many issues. And comfortable warmth in the cold season will not hurt you either.

The "Warm floor" package, prepared by our experts, will allow you to appreciate this technology:

• heat is evenly distributed throughout the room
• the air heats up in a matter of minutes
• system elements are hidden and do not spoil the general view of the room
• well thought-out control system using a touch system or a remote control allows you to quickly adjust and effectively maintain the desired temperature
• the durability and reliability of such a heating system is confirmed by operation in various climatic conditions.

The "Warm floor" package involves the development of an individual project:

• selection of the type and design of the system
• selection of the most economical and reliable circulation pumps
• calculation of system parameters
• heat loss calculation
• optimal heating system layout with indication of the heating circuit and its area, laying pitch, type and diameters of heating elements.

Price: 140 rub. / m²

Underfloor heating package

Underfloor heating package

Create a comfortable climate in your home

• Price: 140 rub. / m²

Geology package

Engineering and geological surveys are carried out in order to determine the characteristics of the land plot selected for development. And the main task of such work is to minimize all possible negative factors that can affect construction work and the operation of an already finished house. First of all, this data is necessary for laying the foundation. And, as you know, the reliability of the entire structure directly depends on its strength.

In this case, the following types of work are performed:

• survey of the construction site and adjacent territories
• sampling of soil at the site
• studies of soil samples to determine the physical and mechanical properties of soils
• geodetic survey of the site with adjacent territories and preparation of an engineering-geological section.

Engineering and geological surveys are divided into three categories of complexity.

• The surface of the land plot is horizontal
• a small number of indicators of soil variability
• lack of groundwater or the presence of one aquifer
• absence of geological processes and technogenic factors.

• Land plot with a noticeable slope
• a significant number of indicators of soil variability
• two or more aquifers
• at the same time, the physical and mechanical characteristics do not significantly affect the changes in the parameters of the foundation laid down in the project.

• Variable land relief
• the basis of the site is made up of soils of various origins
• large heterogeneity of soil variability indicators
• complex groundwater horizons with alternating aquifers and impermeable soils
• there are geological processes affecting the construction and operation of the building
• technogenic impacts are observed.

You need to understand that geological work is a reasonable cost, on which your safety depends. In addition, often, geotechnical surveys help to reduce the total cost of building a house, when it turns out that it is possible to replace the materials originally included in the project of the house with less expensive ones or reduce their consumption.

Price: from 20,000 rubles.

Geology package

Geology package

If you want to build a solid house in which more than one generation of your family will live, it makes sense to use the Geology package, which will be performed by qualified specialists of the Dom4m company

• Price: from 20,000 rubles.

Package "Geodesy"

Geodetic works will allow not only to optimally fit the building into the surrounding landscape and infrastructure, but will also save time, money and prevent waste of materials.

Stages of geodetic works

Topographic survey of the site

At this stage, it is important to consider heights, slopes, wetlands and vegetation on the land on which the house will be located.

Topographic survey makes it possible to calculate as accurately as possible engineering work, such as soil movement and orientation of the building to the cardinal points.

In addition, all the information is applied to the topographic plan, which will be useful in the future for the development of a landscape project, drainage, arrangement of domestic and storm sewers, automatic irrigation systems, when working on site lighting, etc.

Land survey work

In the process of these works, the boundaries of the future home ownership are determined and a package of land management documents is created. This will allow you to easily formalize the right to use the land.

Engineering and geodetic works

In the course of surveys, geodetic and topographic data are refined. The result of such work is a detailed technical report, which will be drawn up by the specialists of our company.

Breakout work

The paper project is transferred to the land plot as accurately as possible: the axes of structures and utilities are applied, the configuration of the pit and the fence is determined.

Price: from 10,000 rubles.

Package "Geodesy"

Package "Geodesy"

The "Geodesy" package is a complex of calculations that will allow you to correctly locate a house on a plot with reference to the relief. The presence and features of the location of neighboring buildings, engineering and transport communications are also taken into account.

• Price: from 10,000 rubles.

Adaptation of the project to the frame

Many experts note that recently frame house building has become popular among
domestic developers.

This type of low-rise construction has long been widely used in America and Europe. Its essence lies in the fact that wood-based panels are attached to a wooden or metal frame. Houses built using this technology have two indisputable advantages: the speed of building the house and high energy-saving indicators.

Considering that most of our company's projects involve the construction of a house from aerated concrete or ceramic blocks, we decided to expand the "Project additions" package and add the "Project adaptation to the frame" service.

This will allow you not only to implement the project you like, but also to independently choose the construction technology that is optimal for your site.

Modern frame house construction provides a wide range of housing construction options - these are the so-called Canadian and Finnish houses, prefabricated, frame-panel houses, as well as built using SIP panels, etc.

Therefore, before ordering the service "Adaptation of the project to the frame" in our company, you should first decide what kind of frame construction technology you have chosen. At the same time, it will not be superfluous to inform our designers about the technology of which manufacturer will be the basis of the project.

Price: negotiable

Adaptation of the project to the frame

Adaptation of the project to the frame

Adapting a project to a frame is not a whim, but a reasonable choice of modern construction technologies

Comfort home package

Explanatory dictionaries claim that comfort is a combination of household amenities, without which life is unthinkable.
modern man in a modern home. Most of these amenities are laid down at the design stage. But we are ready to expand their list and help clients make their own home as comfortable as possible.

Landscape Design Package



Harmony at the intersection of architecture and nature

• Price: from 3000 rubles. per hundred square meters

Individual design

If you decide to build a house, then you have your own idea of ​​what your dream home should be like. And if none of the typical projects suits you, it makes sense to think about an individual project. In addition, all your wishes will be taken into account as much as possible: the level of comfort, the composition of the family, even the view from the window. It is clear that such a project will not be cheap. But you will know for sure that there is no other such thing.
Sometimes, however, you have to resort to individual design forcibly. For example, a developer got a plot of land with a non-standard configuration, and not a single typical project simply fits into it. And it also happens that the number of changes made by the customer is such that it is easier and cheaper to design a house from scratch.

Stages of work on an individual project:

• development of technical specifications for designing a house
• contract for design work
• preparation of a draft design: linking the building to the terrain, external and internal views, layouts, sections
• detailed study of sections of the project.

In addition, you can also order:

• projects of additional structures - garage, workshop, baths, etc.
• visualization of the project in 3D format.

Ultimately, the customer receives a package of design documentation, consisting of architectural and structural sections.

The project presents:

• General plan of the house with reference to the boundaries of the site.
• Floor plans, which indicate the thickness of the walls, lintels and partitions, the area of ​​the premises, the specification of windows and doorways.
• Facade plans with indication of finishing materials and color schemes.

A typical documentation package assumes the presence of two copies of the house project. First
remains with the customer, and the second copy is given to the builders. If necessary, you can to order third copy of the project.

It is not necessary to make such a copy. It can only be useful to you in a few cases. Usually, this is done in order to provide the project to third parties, for example, material suppliers.If time is expensive, then the presence of an additional project of the house will help to significantly speed up the work on adapting the project, and the availability of such copies at once from several specialists will significantly reduce the construction time.

And, in addition, having a copy of the project will help, if necessary, restore lost or damaged documents without unnecessary hassle and time consuming.

Call us! In company Dom4M will treat your problem with maximum attention ... Our specialists will prepare an additional copy of the project as soon as possible.

Additional copy of the project

Additional copy of the project

For the prudent: additional printed copy of the project

• Price RUB 3,000